Announcement

Collapse
No announcement yet.

H&R BMP Question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    H&R BMP Question

    I have the 325ic fitted with H&R BMP (not the regular H&R) red and Bilstein. It seem to be the car is quite low. Not sure why? Is it because the H&R from BMP is lower than normal H&R? or because my car is a cab (heavier)? I am very worry when go over speedbump (worry about hitting the oil pan)
    Ryan
    Last edited by ///WeissM; 06-23-2008, 12:55 PM.

    #2
    You probably got H&R race springs. They lower the car much farther than the H&R sports. If they are red then they are most likely the race springs.


    E30_Fiend
    Need a performance chip for you BMW? Shoot me a PM and I'll get you taken care of!!
    Taylor- Follow me on Instagram @e30_fiend


    Comment


      #3
      Originally posted by ///WeissM View Post
      I have the 325ic fitted with H&R BMP (not the regular H&R) red and Bilstein. It seem to be the car is quite low. Not sure why? Is it because teh H&R from BMP is lower than normal H&R? or because my car is a cab (heavier)? I am very worry when go over speedbump (worry about hitting the oil pan)
      Ryan
      Bmp does not alter the springs from H & R in any way. The way they receive them is the way you get them. H&R doesn't make a spring specifically for Bmp. I believe you have the Race springs which lower the car a little more the sports.

      Comment


        #4
        Yup, sound slike the race springs. Also, the cab is about 200lbs heavier so it will drop more than a coupe/sedan

        Comment

        Working...
        X