Announcement

Collapse
No announcement yet.

What are my options for slight slammage on an m42 car?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by NOMAD View Post
    I think the spring perch would get in the way with regular springs.
    What offset were those wheels? Where did they rub? The splashguard?
    I plan on running 15x7 et20 with 205/50/15 azenis I have.

    I may consider this then because I like the ability to change spring rates. I'd probably have the perch set a little higher than yours and tune out movement with spring rate and sways.

    But yeah, that pan is bout the same height as the front i-lip I have.
    The wheels were et26 and they rubbed at the inner fender lip. On my passenger side it actually chipped my paint a bit due to that.

    Teaguer- That stance is really nice.
    92 Granite Silver Vert
    M60B40 5spd

    Comment


      #17
      Originally posted by RedHoodRidah View Post
      The wheels were et26 and they rubbed at the inner fender lip. On my passenger side it actually chipped my paint a bit due to that.

      Teaguer- That stance is really nice.

      Teaguer- That is about what i'm looking for. I forgot about the bekkers drop hats.. Is there anywhere you can buy the RD springs online? How many of these springs are 318 specific? I know the vogtlands arent
      - '88 m54 coupe

      <3

      Comment


        #18
        Originally posted by NOMAD View Post
        Teaguer -
        Nice stance too! What rear wing is that?
        Scrape your lip much? :D
        Thanks , it looked good and handled even beter.
        The green progressive RD springs have some good rates.

        First pic is with the e30 Mtech-I rear wing while the other pics is with an e28 Mtech-I rear wing with the rubber painted body color .

        Never really scraped the lip but I would grind the hell out of the lower oilpan ....then finally it took a nice solid hit and fubar'd the lower and upper at the same time. :(



        Originally posted by RedHoodRidah View Post
        Teaguer- That stance is really nice.
        :up:



        Originally posted by Jb325is View Post
        Teaguer- That is about what i'm looking for. I forgot about the bekkers drop hats.. Is there anywhere you can buy the RD springs online? How many of these springs are 318 specific? I know the vogtlands arent
        The RD springs should still be available from a few sources here in the US.
        But from what I remember you don't really want the blue ones ....you want to stick with the OG green ones.

        Also my set was definitely not for the 4cyl's as I purchased them originally for my 89' 325is.
        Last edited by Teaguer; 06-27-2008, 02:22 PM.

        E30 M3 / E30 325is / E34 525iT / E34 535i

        Comment


          #19
          Teaguer, you got mad rake son.
          Need parts now? Need them cheap? steve@blunttech.com
          Chief Sales Officer, Midwest Division—Blunt Tech Industries

          www.gutenparts.com
          One stop shopping for NEW, USED and EURO PARTS!

          Comment


            #20
            Originally posted by z31maniac View Post
            Teaguer, you got mad rake son.

            E30 M3 / E30 325is / E34 525iT / E34 535i

            Comment

            Working...
            X