Announcement

Collapse
No announcement yet.

air compressor repair

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    air compressor repair

    I have an oldskool Campbell hausfeld U.S air series #hl700201 compressor that I got for free from work. Its a 2hp 20 gallon 115v 15amp 6.3scfm@90 and 7.9 scfm@40. Stamped on it says Made in U.S.A. and the head has hl-0008. Its a oil type NOT oiless.

    The problem:

    It works... but sounds noisey'er than normal/before and only stays on for 5-6 seconds, then the breaker in my houses fuse box jumps and I have to reset it. Keeps doing this.... Whats wrong? My boss said it lasted 15 years till now.

    Anyone have experiances with compressors? Then should all be the same right? Like a engine......? Thanks.
    84' 318i m30b35 swapped!

    #2
    Plug it into a circuit that has very little running on it. More than likely the circuit you have it plugged into has more amps being pulled through it than the breaker can handle with the compressor plugged in.
    My 2.9L Build!

    Originally posted by Ernest Hemingway
    There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely games.

    Comment


      #3
      It was running fine for 15 years on the same circuit. So.. I dont think thats the problem.
      84' 318i m30b35 swapped!

      Comment


        #4
        That sounds like what my oil less compressor was doing just before it blew up...

        Comment


          #5
          Its a oil type and should last forever.. it was also maintained regularly.
          84' 318i m30b35 swapped!

          Comment

          Working...
          X