-
Originally posted by Matt-B -
Damn for $1400 you can almost buy a lift!
"Modern cars may be able to outgun it, but few can match its character, its motorsport spirit, and the way it plasters a huge grin on your face at any speed." - Patrick George
1988 M3 - Track Rat
1989 325iC M50 Vert
1989 325i Coupe
1991 318is
1995 318ti Club Sport
2006 330i e90
2008 Tundra Crewmax -
Oh, do they now? Yes, on some BMWs the engine oil would end up in the manifold...engine oil, transmission fluid, brake and washer fluid remain in the vehicleOriginally posted by Matt-BComment
-
After my friend wrecked his 318is, we were stripping all the aprts and we did the same thing. Except we had no fancy roller... All muscle baby.Comment
-
BEERTECH
Comment
-
but with this, u dont need to reinforce the floor, a lift you do... cool non the less, but a lift would be 20x better.
Comment
-
not the lift i postedBEERTECH
Comment
-
i could see that causing damage to the engine. same as when you roll your car and the motor get turned upsdie down. Oil will run all over, that is not good.
Comment
-
Originally posted by RobOriginally posted by Kondour
And only $68 moreOriginally posted by Rob
"Modern cars may be able to outgun it, but few can match its character, its motorsport spirit, and the way it plasters a huge grin on your face at any speed." - Patrick George
1988 M3 - Track Rat
1989 325iC M50 Vert
1989 325i Coupe
1991 318is
1995 318ti Club Sport
2006 330i e90
2008 Tundra CrewmaxComment
-
-
Hey , it holds it in place while you weld itOriginally posted by e30evolution
"Modern cars may be able to outgun it, but few can match its character, its motorsport spirit, and the way it plasters a huge grin on your face at any speed." - Patrick George
1988 M3 - Track Rat
1989 325iC M50 Vert
1989 325i Coupe
1991 318is
1995 318ti Club Sport
2006 330i e90
2008 Tundra CrewmaxComment
-
lol, I thought that shit was for joke... What protects the side of the car from crushing under its own weight? And does it pull the car back down as well? lol.Comment
-
Look at it, its pretty clear its on like.. rail things.Originally posted by Halon
Don't worry though I wondered that too.
Sold it.Comment
-
it looks like there are 2 rails, and they are bolted to the hubs, so when the car is tilted, it is not touching anywhere... that's actually kinda cool for doing like exhast work and stuff.Dan
Comment
-
i would not want the entire weight of my car resting on two ball joints, a control arm bushing, and the trailing arm..... the weight is applied in a way those parts were not designed for.... i dont like itComment
Comment