mtech II questions

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 8380 Labs
    Forum Sponsor
    • Oct 2006
    • 2990

    #1

    mtech II questions

    ive been looking into these for a minute, havent been able to dig up all the info im looking for yet though.

    1) what's the difference between the kits made for converts and coupes, any? i saw something in one of the threads i was digging through about the sideskirts mounting differently.

    2) how do the kopi mtech II rep bumpers from abraham fit, anyone have any experience? what are they made of?

    3) is the mounting hardware still available at the dealer?
    8380 Laboratories
    M3 Champs Poster
  • Wishno87
    R3V OG
    • Jul 2007
    • 6025

    #2
    1) Vert sills are different therefore the skirts are also.

    3) im pretty sure they are as the kit is also still available.
    Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

    Comment

    • mikeedler
      R3V OG
      • Feb 2004
      • 6707

      #3
      all of the mounting stuff is avail, but if i remember right it is roughly 150 dollars for just the mounting pieces.

      only the lower skirts are different for verts/4 doors/ and 2 doors-- the 2 door lower skirts will work on a 4 door, but you will see a mounting hole when you open the rear door up. the front and rear bumpers and front valance are all the same.

      Comment

      • gwb72tii
        No R3VLimiter
        • Nov 2005
        • 3864

        #4
        anyone have the part nos. for the kits?
        “There is nothing government can give you that it hasn’t taken from you in the first place”
        Sir Winston Churchill

        Comment

        • Hartge_H27
          E30 Mastermind
          • Jun 2006
          • 1699

          #5
          ur best bet is to go to realoem.com there r alot of part numbers. But yes the entire kit is avalible from the dealer.

          Comment

          • 8380 Labs
            Forum Sponsor
            • Oct 2006
            • 2990

            #6
            Originally posted by mikeedler
            the 2 door lower skirts will work on a 4 door, but you will see a mounting hole when you open the rear door up. the front and rear bumpers and front valance are all the same.
            so would this mean that the lower skirts from a 4 door would work fine on a 2 door?
            8380 Laboratories
            M3 Champs Poster

            Comment

            • mikeedler
              R3V OG
              • Feb 2004
              • 6707

              #7
              yep. 2 doors will also work on a 4 door-- with a few small minor "fixes"

              Comment

              Working...