OBX M42 Turbo Manifold

[SamE30e]

Made out of Rare Non Magnetic Rice Metal Alloy...

They burn up.

They can't be worse then the no name chinese ones that supposedly break all the time. I've seen one on a car thats been going for 15k not one problem, just added a brace.

[SamE30e]

pictures look pretty good. i hardly ever see turbo manifolds that come with a downpipe for bmw's....wonder if they make one for m50 too...

They do.

[DCColegrove]

Made out of Rare Non Magnetic Rice Metal Alloy...

They burn up.

[gearheadE30]

Why in the world would you ever have to "clearance" the fender for anything to do with the engine? That's ludacris.

I'll try to find pics. Nevermind what I said, though. I only glanced at the link and assumed it was a top mount manifold. I have seen people bash the inner fender in in order to fit a turbo in there with a top mount turbo manifold. I really don't know why anyone would do that, but they do. This one should be fine, and actually looks pretty good.

[golde30]

pictures look pretty good. i hardly ever see turbo manifolds that come with a downpipe for bmw's....wonder if they make one for m50 too...

[TwoJ's]

...and if you go for it, just remember that you will probably have to "clearence" your front fender and wheel well with a large hammer. The M42 doesn't leave much room for a turbo.

Why in the world would you ever have to "clearance" the fender for anything to do with the engine? That's ludacris.

[SpecM]

I would def. add some braces and welds to that, for longevity

[SamE30e]

I think the turbo mounts down below, there's a lot of space there. At least thats the impression the down pipe gives me.

[gearheadE30]

...and if you go for it, just remember that you will probably have to "clearence" your front fender and wheel well with a large hammer. The M42 doesn't leave much room for a turbo.

[Jordan325iC]

Hey,

I was considering building a manifold myself, but I'm not trusting my craftsmanship. Does anyone have experience with this manifold?
http://cgi.ebay.com/ebaymotors/OBX-T...mZ150306503126

Thanks

Sam

It looks decent. I'm sure the piping is very thin, but lots of people on this site have had success with ebay manifolds.

I would definitely check and make sure that it will fit the e30 chassis. I was under the impression that there were no mass produced manifolds for you guys.

[TwoJ's]

Well, I don't have any experience with it, but one thing is for sure; it's cheap. In this day and age on ebay you get what you pay for.

[SamE30e]

Hey,

I was considering building a manifold myself, but I'm not trusting my craftsmanship. Does anyone have experience with this manifold?
http://cgi.ebay.com/ebaymotors/OBX-T...mZ150306503126

Thanks

Sam