Ok, You have to see this...

[MR 325]

Look at the posts by GERMAN DRIVER on this thread...

http://www.maxbimmer.com/forums/showthread.php?s=&threadid=40041

He fucking drilled new holes so his car would be five lug. That is not normal...

[Spencer]

That's funny and his car is nasty.

-Spencer

[Jand3rson]

I like Jordan's reply.

[Z3Jonathan]

Very lame.... I've heard of people re-drilling rotors. Redrilling a hub just isn't smart.

[cramer]

Re: Ok, You have to see this...

Look at the posts by GERMAN DRIVER on this thread...

http://www.maxbimmer.com/forums/showthread.php?s=&threadid=40041

He fucking drilled new holes so his car would be five lug. That is not normal...

actually it's done more then you may think. Alot of the A2 VW guys do it for a cheap 5 lug swap and some companies even sell redrilled hub kits. Of course for VW, you can just buy 5 lug rotors to swap on so you don't need to drill those, the rears are a direct fit (no hub just remove rotor and bearings and install new 5 lug units) and the front the 5 lug rotors match right up to the redrilled 4 lug ones.

[BMW BMXER]

Ive seen that car in person pre drilling. It was neat.

[Erick]

Good use of the past tense BMW BMXER.

[Z3Jonathan]

Re: Ok, You have to see this...

Look at the posts by GERMAN DRIVER on this thread...

http://www.maxbimmer.com/forums/showthread.php?s=&threadid=40041

He fucking drilled new holes so his car would be five lug. That is not normal...

actually it's done more then you may think. Alot of the A2 VW guys do it for a cheap 5 lug swap and some companies even sell redrilled hub kits. Of course for VW, you can just buy 5 lug rotors to swap on so you don't need to drill those, the rears are a direct fit (no hub just remove rotor and bearings and install new 5 lug units) and the front the 5 lug rotors match right up to the redrilled 4 lug ones.

I thought VW guys just ran spacers which had 4 lugs on one side and 5 on the other? :?: :?: ?

[trashcop 80s 80s]

I like his paint.

[Jarvis]

What a waste of an MTech2 kit. It'll be a shame when his hubs crack, his wheels fall off, and he skids into a tree while ruining the kit. What a dumbass. I hate people.

[zandi]

What's the big deal about drilling in hub's? I mean this guy wants his car to be like that, let him, you guys are making a big deal out of something small because his car looks out of the ordinary. I say, He gave his bimmer a retro Benz look. As long as he isn't drilling holes in his oil pan, what's the deal?

[royalflush313]

^^^

retro benz look ?????

That paint job is nasty. If the whole car was that tone of white and didnt have those wheels, it could look good.

what the hell are those canadians thinking :roll:

[zandi]

^^

It's original, it's unique. Those colors are a good contrast, some people don't like some colors. Having the dedication to go ahead with something that is out of the ordinary like that, which still looks good, runs, and handles well (assuming he did he a suspension kit with those wheels...) is good enough.

[BS87]

Uh, because the hubs are ade for 4 hles, not 5... and one of those 5 holes is close to another.. Can you say stree\ss fracture?

[Z3Jonathan]

What's the big deal about drilling in hub's? I mean this guy wants his car to be like that, let him, you guys are making a big deal out of something small because his car looks out of the ordinary. I say, He gave his bimmer a retro Benz look. As long as he isn't drilling holes in his oil pan, what's the deal?

It stupid... and you're not only jeopordizing yourself, but other people on the road.

Drilling holes in the oil pan would be better. It would atleast quickly render the engine useless, and keep the car off the road.