Steering Column Removal

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • TDE30
    replied
    Originally posted by e30nub
    Thanks man, appreciate it! Going to do this tomorrow when there's some light.
    Does this apply to numbers 1 through 4 or only number 4?

    Leave a comment:


  • e30nub
    replied
    So I tried loosening this bolt. Does it loosen all the way and drop down, or does it just stop? Mine just stops at about where it is in the picture

    Leave a comment:


  • e30nub
    replied
    Thanks man, appreciate it! Going to do this tomorrow when there's some light.

    Leave a comment:


  • bmwpower
    replied
    You beat me. Was just going to say and post the same thing (minus the ass part).

    Click image for larger version

Name:	IMG_0072_upd.JPG
Views:	1
Size:	61.5 KB
ID:	7111450

    Leave a comment:


  • Joe318is
    replied
    1) loosen the silver/gold [Cadmium plated] bolt in this pic


    2) Remove the bolt from the u joint, which you have done. Wedge a screw driver into the slot on the ujoint, then push the joint off the spline, which would make you push it to the front of the car. Large screwdriver/prybar works.


    3) Should be a bolt under, or near the red circle. The green circle is where the column 'slips' into the chassis. PUSH THE SHAFT FORWARD [sound familiar????]


    NOTE: The bolts that hold the column in may be infront of the green circles, towards the back of the car.

    4)EAT MY ASS!

    Leave a comment:


  • e30nub
    replied
    More RealOEM
    STEER.COL.-LOWER JOINT ASSY

    STEER.COL.-LOWER JOINT ASSY

    STEERING COLUMN-TUBE/TRIM PANEL

    STEER.COL.-LOWER JOINT ASSY

    STEER.COL.-STEER. SPIN. UPPER

    Leave a comment:


  • e30nub
    replied
    Any help? I wanted to remove the column and go to the yard and grab another one and swap it. Bentley show's nothing.

    I got one nut and bolt out of the column (you can see it missing in pic 3)

    The nut in pic 2 (next to the pedals) I couldn't take out. What way does it go?

    Leave a comment:


  • e30nub
    replied
    5 dollars to who can help me out. This needs to be done.

    Help me out here guys. I got the first nut off the knuckle.
    Pictorals:






    Leave a comment:


  • e30nub
    replied
    Pics coming in 5...

    Leave a comment:


  • e30nub
    replied
    Originally posted by Joe318is
    wheres the pic kiddo? i can point it out that way
    Don't have a camera on me sorry. My phone does not have a camera on it either. Thanks anyways papi

    Leave a comment:


  • BeirBrennerE30
    replied
    still looking for answers too. More concerned with the removal of airbag column and replacement of non-airbag

    Leave a comment:


  • Joe318is
    replied
    wheres the pic kiddo? i can point it out that way

    Leave a comment:


  • e30nub
    replied
    Originally posted by Atreus
    lols at the banter between yous twos. haha. you asked. i told you. stfu and do it.

    priceless. :D
    Did I miss your post? I don't see any replies from you.

    Leave a comment:


  • Atreus
    replied
    lols at the banter between yous twos. haha. you asked. i told you. stfu and do it.

    priceless. :D

    Leave a comment:


  • hoveringuy
    replied
    This is on my "to do" list, but not for stripped splines. I'd like to know if anyone has replaced the steering U-joints or anything you've done to tighten up the steering.

    Besides tightening the big nut on the airbag cars.

    Leave a comment:

Working...