I hope its not dead...

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • lifeiskaos
    replied
    +1

    Leave a comment:


  • accident
    replied
    sounds like a rod bearing to me...

    Leave a comment:


  • dager325
    replied
    It wasn't jerking or anything when I would get on the gas when I was last driving it but, It made more noise. When I would let off it would be less loud.

    Leave a comment:


  • DatUtahGuy
    replied
    Since you said spark plugs... maybe make sure that one is not popping off by accident. The last ones, close to the firewall, can be tricky to screw in properly. Was the acceleration affected when you were driving it home, did it feel in any way different? Make sure the retainer clips are not sideways or they will be struck by the shaft.

    Leave a comment:


  • dager325
    replied
    Still stumped and need help!!!!! We pulled the cap off and the rotor and around it was chalky and what not, cranked it over agian and still was making noise. I'm pretty dam sure that its coming from the head. I was thinking about pulling the head off and then crank it to see if that was the trouble but I would rather not if I don't have to. The valve clearence is fine and the rockers look fine. The only other thing that I thought was weird was that the spark plugs had oil on them, possible a ring could be broke or something??? Thanks.

    Leave a comment:


  • Intro
    replied
    try pulling ur belt off of your fan and waterpump, then do the same thing as in the video. If the sound persists then you may be in need of a rebuild. If sound stops, it could be something as easy as your fan hitting something..

    I had the same problem when i first rebuilt the topend on my car, turned out to be the fan hitting a hose clamp.

    Leave a comment:


  • dager325
    replied
    Heres the link to my video.

    Leave a comment:


  • AndrewBird
    replied
    Originally posted by Mucci
    Seriously, stop posting until you've opened up your valve cover and looked inside.
    He did. He said he checked the valve clearance and everything was fine.

    This might sound stupid, but see if your distributor cap cover is sticking out and hitting the fan. Also, could be the fan hitting the radiator or something else. Just check everything that moves on the engine.

    Leave a comment:


  • Moto-Mucci
    replied
    Edit: I retract
    Last edited by Moto-Mucci; 02-22-2009, 08:13 AM.

    Leave a comment:


  • Streichholzschächtelchen
    replied
    My bad I replied at a glance. Uh, injectors are noisy on e30s too. Maybe one is effed up.

    Leave a comment:


  • dager325
    replied
    Originally posted by kamotors
    m20's naturally tick,maybe you could record it on video so we could help diagnose it better.
    I know what you mean. It would do that a lot but now its a lot louder. It sounds very similar to this:

    Leave a comment:


  • Moto-Mucci
    replied
    ...or we could try to help him out.

    Leave a comment:


  • PhillyG
    replied
    Newbies with awful descriptions.

    Leave a comment:


  • Moto-Mucci
    replied
    Def pull the valve cover off. It only takes like 15min. Check for things that look not good.

    Leave a comment:


  • kamotors
    replied
    m20's naturally tick,maybe you could record it on video so we could help diagnose it better.

    Leave a comment:

Working...