E30s on 16s - post yours
Collapse
X
-
-
Nice, I live about 30 minutes from the Dragon. Two things heavily frowned upon... speeding and crossing the double mustard.
The xxrs look good. I have been eyeing them for my new project.
Leave a comment:
-
-
Nice thanks. I'm going to order some 8x16s this week and I'm trying to figure out what offset and tire size to go with.Thank you.
No spacers required.
This is why I got ET15 offset for these wheels, so that I wouldn't have to use spacers and still get that flush look.
Fender Rolling:
The fronts are no problem/ no rolling required.
The rears:
I first used 205/50s and rolled my fenders completely.
With a full loaded car (4 passengers + loaded trunk) it did still rub a bit on bumps. It's didn't rub on the fender lip itself, but about 2 inches higher.
I now have 205/45s and it has not rubbed at all.
I would recommend these.Leave a comment:
-
Thank you.
No spacers required.
This is why I got ET15 offset for these wheels, so that I wouldn't have to use spacers and still get that flush look.
Fender Rolling:
The fronts are no problem/ no rolling required.
The rears:
I first used 205/50s and rolled my fenders completely.
With a full loaded car (4 passengers + loaded trunk) it did still rub a bit on bumps. It's didn't rub on the fender lip itself, but about 2 inches higher.
I now have 205/45s and it has not rubbed at all.
I would recommend these.Leave a comment:
-
-
-
16x8 et 20, what's the best tire size to run? Will I need adapters/rolling/pulling? 91 318iLeave a comment:















Leave a comment: