H&R sport/Bilstein Teaser

[PeaveyBassist]

Here ya go guys. I havent done one of these in a while! I should post a couple more tomorrow!

[Need4Speed1299]

The socket and the rag are throwing me off.

[BUDNUNTA]

Havent seen much of you in a while?

Lowered the spring cup.
I thought you had j stocks?




Hunter

[Jb325is]

I predict bottoming out, unless you didnt move it much.. How much did you lower it?

[Philo]

For realz. I see a lowered spring perch. . . .WAY lowered. (If that is a picture of clearance with the wheel mounted)

I'm scared for you.

[T3rd Ferguson]

are these the ones we traded for? when you sent me your GC's

[PeaveyBassist]

Same ones yea. Spring perch was lowered 3/4". Thats the wheel mounted on the hub with no rotor. BUT... 195/60/14 Azeni I really dont plan on running anything bigger in diameter really so I didnt think that would be much of an issue. I had Jstocks on my last car about 3.5 years ago and it got wrecked. Then got this car with coilovers but were too bouncy/stiff/uncomfortable for a DD so I traded for H&R Sports with stock strut housings. I have one side almost finished and I'll be finishing it all up tomorrow. The tires should be about flush in front.

[Philo]

What are you doing about the bottoming out of the damper problem? Or do you think you'll have enough to get by with?

[PeaveyBassist]

I think I'll be ok. I only lost 3/4" of travel. I guess we will find out soon!