If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I do have fronts. I just don't have all the little nuts and bolts to mount them. I suppose I could just use zipties like I did with the backs though.
I did that.
Originally posted by kronus
You can use home depot bolts, just get a pair of large flat washers for each side. As long as you have the bracket, you're good. Also, the clips for the upper front bits. I lost two of mine, so I used 2-sided tape to secure the upper flappy bit.
You can use home depot bolts, just get a pair of large flat washers for each side. As long as you have the bracket, you're good. Also, the clips for the upper front bits. I lost two of mine, so I used 2-sided tape to secure the upper flappy bit.
You need fronts, dude. Also, either you mounted your spoiler wrong, or it's the Alpina version of the tech I, because it looks like it goes up higher than a normal tech I does.
Leave a comment: