I can haz stance?

[Moto-Mucci]

Wait...how are you not running spacers up front and how are you poking that much? Something's not right.
I've got the same size wheels with same offsets and 10mm spacers up front and I can barely squeeze a pinky in between the rim and shock. AND it looks like you're poking more then I am.

What do you mean you made a "dip"?

As for a sig, you've got the pics on pg1. Resize. Crop. Sig. Done.

[White325is]

In the pics I had my camber platers all the way out. I never flipped them around so I could adjust them in. There for that's why I had so much poke. Now with the plates flipped my camber leans in damn close to an inch. For the dip. When I welded the housings back together I slipped a pipe over the cut to make sure the housings was even and better strength. The rim was only rubbing that pipe so I grind it down to make a dip to clear the wheel.. keep in mind not all wheels are made equal..

[ldsbeaker]

As for a sig, you've got the pics on pg1. Resize. Crop. Sig. Done.

Srsly. That photochop job has GOT TO GO!! That rear dish is wack!

[BeirBrennerE30]

love the car.... do a write up and post lots of pics when you shave/tuck you engine bay. I loved what you did to your other car!

[S&E30]

Mmm, looks good. Lower it like your sig, get to that level. Would be so sick.

[White325is]

I'm not shavin or tuckin anything on tbe bay. I already painted it once..

You guys don't understand. I can not go any lower than I already am. 24v pans hang much lower than any other pan. If u look at the second pic you can see my pan is already a inch off the ground.

[ieatpeople]

can't wait to put my type t's on my e28!! 17x9.5 +13 with 235/45-17's, should look titties!