BBS RS's 3 piece rims only.
Collapse
X
-
-
-
I envy you, I missed out on those, trying to build my own right now...oh and I was just in Charleston the last two days, would have loved to see these in person.Comment
-
these are mineee 005 7x16&006 8x16:D

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.usComment
-
ooof.
Fantastic job on refinishing, but that is a bad gold. What most people don't know is that Duplicolor Gold is a 95% match to BBS gold when combined with a matte clearcoat.
observe:
Comment
-
Comment
-
What brand/size tires you running?
Also, why does that front right wheel look so wonky?Comment
-
The tires are Falcon 912 205/55/15, I tried 225/50/15 first but could not get them to fit without stretching the fenders.
Not sure at this point. I used M3 cabs and the front end sits higher than with the other cut off springs that the PO installed. Everything else on the front end are new OEM parts. Both front tires stick out a little more than I would like which I think is because of the ET13 I ended up with after I installed the 2" lips.
Cheers,
JimsigpicComment
-
It just looks strange for some reason, as if there is quite a lot of positive camber. I'm running the same exact wheel size up front (15x8), and 205/50/15 Falken 512s (whose fit is identical to the 912s I've been told).The tires are Falcon 912 205/55/15, I tried 225/50/15 first but could not get them to fit without stretching the fenders.
Not sure at this point. I used M3 cabs and the front end sits higher than with the other cut off springs that the PO installed. Everything else on the front end are new OEM parts. Both front tires stick out a little more than I would like which I think is because of the ET13 I ended up with after I installed the 2" lips.
Cheers,
Jim
My front wheels are flush with the fenders:
Comment
-
I love your car Jim! Let me know when you want to get rid of those ronal's ;)The tires are Falcon 912 205/55/15, I tried 225/50/15 first but could not get them to fit without stretching the fenders.
Not sure at this point. I used M3 cabs and the front end sits higher than with the other cut off springs that the PO installed. Everything else on the front end are new OEM parts. Both front tires stick out a little more than I would like which I think is because of the ET13 I ended up with after I installed the 2" lips.
Cheers,
Jim1990 Alpinweiss 325i - secret 500whp buildOriginally posted by audiquattrotbimmers b4 b*tches....remember that.
2000 Audi S4 B5 Laser Red
1990 Nissan 240sx - Drift Missile
2006 CBR600RR

Comment
-
The fronts sit almost vertical, and the back ones are negative camber. It will be interesting to see what the alignment shop has to say. I would like to see a picture of the front of your car when you have time.
Thanks, I will let you know if my boys will ever let me cut loose of them. For now they are going on the daily driver.;)619E30 I love your car Jim! Let me know when you want to get rid of those ronal's ;)
Cheers,
JimsigpicComment
-
What type of BBS are these? They kinda look like SSR Formula Mesh!
e30slidewayz....Redrill Info?Last edited by cre30; 04-21-2011, 04:43 PM.Comment
-
Comment




Comment