Announcement

Collapse
No announcement yet.

Pic request: Need pictures of E30's running AZEV A wheels or KESKIN KT1 wheels!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Pic request: Need pictures of E30's running AZEV A wheels or KESKIN KT1 wheels!

    Hey guys, looking for pictures of non-M E30 cars running Azev A wheels or Keskin KT1.

    Ideally cars running either wheel in a 16" size.

    Also, if anyone owns either set of these wheels please PM me. I have a couple questions.

    Thanks,
    Matt
    BimmerHeads
    Classic BMW Specialists
    Santa Clarita, CA

    www.BimmerHeads.com


    #2
    Pictures from last summer.












    Comment


      #3
      If you guys know the tire size specs please share those too!

      Thanks. :)
      BimmerHeads
      Classic BMW Specialists
      Santa Clarita, CA

      www.BimmerHeads.com

      Comment


        #4
        wooof. that's a schmexy touring.


        Originally posted by yert315
        Your mother is plug n play

        Comment


          #5
          My car was on : 16x7.5 et10 (205/50) 16x9 et20 (215/40)

          Different tire heigths are to compensate the rear rake of the H&R springs

          Comment


            #6
            Keskin KT1

            if your going to try to run the et 25 set, you will need atleast 10mm spacer,prob. a 15mm (which is better-you can get them hubcentric). Mine needed to be at about an et10 to not rub the struts when in reverse and turning on my old vert. they will fit with very little fender rolling if you run 215/40/16 euro stretch style on a late model car.

            Comment


              #7
              MR325 has made a request.. now move!!!!!!!!!!!

              Comment


                #8
                Originally posted by Charley View Post
                OT: this picture is sooooooo bad ass.
                @IRON-E30 aka Edwin:D

                Comment


                  #9
                  Originally posted by mikeedler View Post
                  Keskin KT1

                  if your going to try to run the et 25 set, you will need atleast 10mm spacer,prob. a 15mm (which is better-you can get them hubcentric). Mine needed to be at about an et10 to not rub the struts when in reverse and turning on my old vert. they will fit with very little fender rolling if you run 215/40/16 euro stretch style on a late model car.
                  i have 10 mm hubcentric spacers...they make em hubcentric for 10 mm. dunno if any smaller tho.
                  (SOLD) 1988 327i Build Thread: http://www.r3vlimited.com/board/showthread.php?t=155086
                  1970 Gruppe 2 2902 M20 Turbo Build: http://www.r3vlimited.com/board/showthread.php?t=373891

                  Comment


                    #10
                    These are one of my dream set of wheels, they have such a classic Euro look to them.

                    Comment


                      #11
                      16x7.5 et20. 205/50. Thinking about what tires i can run for 215s. Tough choices.

                      I'll look around for a picture.

                      Comment


                        #12
                        mine but 17.



                        spec are:
                        17x8.5 et 20 with 8mm spacer =et12 tyre 205/45/17
                        17x10 et 20 with 5mm spacer =et15 tyre 245/40/17

                        rear roll n pull..

                        Comment


                          #13
                          What's with all the hot tourings up in this bitch?

                          Originally posted by SpasticDwarf;n6449866
                          Honestly I built it just to have a place to sit and listen to Hotline Bling on repeat.

                          Comment


                            #14
                            I have 16x9's all around, didn't need a spacer like everyone always says either.. What's your question?

                            - '88 m54 coupe

                            <3

                            Comment


                              #15
                              Originally posted by Jb325is View Post
                              I have 16x9's all around, didn't need a spacer like everyone always says either.. What's your question?
                              Are those Azev? A little hard to tell from that pic. Have any more? Also, what size tire?

                              Thanks!
                              BimmerHeads
                              Classic BMW Specialists
                              Santa Clarita, CA

                              www.BimmerHeads.com

                              Comment

                              Working...
                              X