Announcement

Collapse
No announcement yet.

3 verts in a parking garage

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31
    Originally posted by Jaxx_ View Post
    fitment specs of the middle one?
    16x9 et 15 all around 3mm spacers up front no spacers in rear yet. 5mm spacers going on rear soon. H&R springs and bilstien shocks with all spring pads still in. tires are 215/40/16 up front and 215/45/16 in the rear. I need new tires to make it look better but these were cheap and until I get the stance right I'm gonna use them.
    My Multi car part out. Need a part? Pm me...
    http://www.r3vlimited.com/board/showthread.php?t=193051

    Need 24v swap parts? How about a LSD? Plastic Bumpers? Or anything else click here...
    http://www.r3vlimited.com/board/showthread.php?t=215044

    Have you done business with me? If so leave me feedback here...
    http://www.r3vlimited.com/board/showthread.php?t=188307

    Comment


      #32
      Originally posted by ill4noreason View Post
      16x9 et 15 all around 3mm spacers up front no spacers in rear yet. 5mm spacers going on rear soon. H&R springs and bilstien shocks with all spring pads still in. tires are 215/40/16 up front and 215/45/16 in the rear. I need new tires to make it look better but these were cheap and until I get the stance right I'm gonna use them.
      rolled fenders?
      '84 318i M10B18 147- Safari Beige
      NA: 93whp/90ftlbs, MS2E w/ LC, 2-Step
      Turbo: 221whp/214ftlbs, MS3x flex @ 17psi

      Comment


        #33
        No not yet. I'm rolling them at h20 then I can go lower.
        My Multi car part out. Need a part? Pm me...
        http://www.r3vlimited.com/board/showthread.php?t=193051

        Need 24v swap parts? How about a LSD? Plastic Bumpers? Or anything else click here...
        http://www.r3vlimited.com/board/showthread.php?t=215044

        Have you done business with me? If so leave me feedback here...
        http://www.r3vlimited.com/board/showthread.php?t=188307

        Comment


          #34
          Perhaps one day mine will be worthy of a post. Until then, well done gentlemen.
          Proud owner: 1989 325ic

          Comment


            #35
            Originally posted by ill4noreason View Post
            No not yet. I'm rolling them at h20 then I can go lower.
            just what I wanted to hear. i hope to put my x8s on without too many issues, but I know I'm rolling mine.
            '84 318i M10B18 147- Safari Beige
            NA: 93whp/90ftlbs, MS2E w/ LC, 2-Step
            Turbo: 221whp/214ftlbs, MS3x flex @ 17psi

            Comment


              #36
              Originally posted by ill4noreason View Post
              16x9 et 15 all around 3mm spacers up front no spacers in rear yet. 5mm spacers going on rear soon. H&R springs and bilstien shocks with all spring pads still in. tires are 215/40/16 up front and 215/45/16 in the rear. I need new tires to make it look better but these were cheap and until I get the stance right I'm gonna use them.
              you have my old vogtland coupe springs on the front 318 h&r sport springs on the rear... just to be correct lol

              Comment


                #37
                nice

                Comment


                  #38
                  is that gregs old car? the blue one?
                  I got a fender roller now! LMK if you need me to roll your fenders or want to rent the tool from me locally.

                  Paypal: vdang5@gmail.com

                  Delta Auto Care
                  2875-C Towerview Road
                  Herndon, VA
                  703.435.1375

                  My Feedback Thread: Evil_Twin

                  Comment


                    #39
                    Originally posted by evil_twin View Post
                    is that gregs old car? the blue one?
                    No. It was a Virginia car and had grey interior when I bought it. This one runs and drives great.
                    My Multi car part out. Need a part? Pm me...
                    http://www.r3vlimited.com/board/showthread.php?t=193051

                    Need 24v swap parts? How about a LSD? Plastic Bumpers? Or anything else click here...
                    http://www.r3vlimited.com/board/showthread.php?t=215044

                    Have you done business with me? If so leave me feedback here...
                    http://www.r3vlimited.com/board/showthread.php?t=188307

                    Comment

                    Working...
                    X