If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
2pc ARE 398's 5x120 et36
17x9.5 all around. Around Et 3 up front and et -5 in the rear.
Mexi poke because of the adapters.
Tires are 215/40 nexans that run wide
Suspension:
JOM coilover/sleeves
Front all the way down no spring pads
Rear all the way down with adjuster in place. Otherwise the lip of the wheel sits on my 1/4 panel and I cant pull out those panels any further...
Next wheels will be something like these, but they have et56 barrels and not et36 barrels like these current ones. So I should be able to make them fit better and go lower.
Comment