I hopped on this bandwagon.

[CrJdMc]

yeah, i am really liking this look.

is there anything done to this body wise? it looks like the 325IS front bumper. and maybe the bumpers are tucked a little? im not sure, and i have the driveshaft mostly in, i just need the 3 bolts to the tranny in. I would have it completely done now, but im sick, lol. hopefully some true picture updates soon.!

[CrJdMc]

So, quick question, are these ellipsoidal projectors?

[Holland]

Those are US ellipsoids. And in the previous picture the car has the stock front with IS side skirts. You can pull a nice minor bumper tuck with 88 bumper shocks.

[CrJdMc]

So it was running really bad, it was just sitting, and i got a shitty picture, of it sitting, barely running, lol
What the problem was it sounded like a cam lop, but performed horribly, i was thinking it could be the ecu, it could be the plugs, it may still have some bad gas, maybe water in the gas, i wasnt sure, so i did the most simple stuff to see if it worked, i changed the oil and filter (just for maintenance not to fix the problem lol) then i bought some "performance" bosch plus 4 plugs, and replaced them,


plugs :afro


plug caps


this stuff


gumout, i actually didnt use this yet, i am going to fill up the car with premium and put this in, for now i used the stuff that chevron makes, with techron and stuff, it worked very well on the bus, and i hope to see the same results in this car,

bought this to do the dash, but im just going to buy a cover for it, ill use the bondo for when i remove the rear spoiler i guess.




this for touch up


took it for a test drive, yeah it runs better ;)

[Huff]

Do not use those Bosch plugs. There are numerous write ups on here why they are bad with M20's. Return them and get the single point ones

[CrJdMc]

Really? they seem to be working great for me, ill keep that in mine is i notice anything though!

[CrJdMc]

So nothing really happening lately, minus fixing dyeing the door cards, and saving for some performance stuff to do, here is a pic of the door cards.


and this little beauty i picked up from a friend.


I plan on doing some paint work (wet sanding clear off), and draining the gas tank ,fuel filter because i think there is Trash in the gas, it runs fine at first, then it starts to run bad, and it cuts off, once it sits, it is fine. I thought it was a over-heating issue at first, but everything in that area seems ok,