SantaCruzE30's Build/Resurrection
Collapse
X
-
Sweet i will check for this as well!Any 021 or 027 ECU will run that motor, the 528e would have come with either one depending on year.
They are the same except the 027 has a removable chip while the 021 does not.
Sitting near the ECU should be another box, usually green however rebuilt ones can be blue. This is the idle computer (Motronic 1.0 used a separate computer to run the idle control valve) Make sure you have one in there, that could be another culprit.
Looks like this:

Leave a comment:
-
Any 021 or 027 ECU will run that motor, the 528e would have come with either one depending on year.
They are the same except the 027 has a removable chip while the 021 does not.
Sitting near the ECU should be another box, usually green however rebuilt ones can be blue. This is the idle computer (Motronic 1.0 used a separate computer to run the idle control valve) Make sure you have one in there, that could be another culprit.
Looks like this:
Leave a comment:
-
thank you very much for the input, i will check this out tomorrow if i can. so do you think the 528e DME will work with my car?It sounds like the engine is firing off of the cold start injector only. That will dump enough fuel to fire the engine, but not keep it going.
Ignition is fine as it fired. Next is to check fuel and CPS/TDC Sensor.
If the car has been sitting for a long time, the injectors can become clogged. They are unique to ETA motors and you would need to source some from another ETA M20B27 (Not the Super ETA as those are different (ie high impedance vs low impedance)
Odds are the CPS / TDC sensors are fine (located on the bellhousing of the transmission btw) as the engine fired, however they may be another place to look.
As the cold start injector is working (blue guy above the center of the valve cover) you have fuel pressure, so start checking what I said above.
Nice buy for 500 bucks. I wish E30 Chassis up here would show up for that. On the hunt for another racecar candidate.
Good luckLeave a comment:
-
It sounds like the engine is firing off of the cold start injector only. That will dump enough fuel to fire the engine, but not keep it going.
Ignition is fine as it fired. Next is to check fuel and CPS/TDC Sensor.
If the car has been sitting for a long time, the injectors can become clogged. They are unique to ETA motors and you would need to source some from another ETA M20B27 (Not the Super ETA as those are different (ie high impedance vs low impedance)
Odds are the CPS / TDC sensors are fine (located on the bellhousing of the transmission btw) as the engine fired, however they may be another place to look.
As the cold start injector is working (blue guy above the center of the valve cover) you have fuel pressure, so start checking what I said above.
Nice buy for 500 bucks. I wish E30 Chassis up here would show up for that. On the hunt for another racecar candidate.
Good luckLeave a comment:
-
1+check this for sale thread as funfgan has various dme's for sale listed. He can provide the information as to what would be the best dme to go with. Dont pay retail ! Buy from a trusted member of r3v.
http://www.r3vlimited.com/board/showthread.php?t=253379Leave a comment:
-
Check this for sale thread as FunFgan has various DME's for sale listed. He can provide the information as to what would be the best DME to go with. Dont pay retail ! Buy from a trusted member of R3V.
Leave a comment:
-
anyone?do you guys think this DME will work with my car? i need to get one.
http://www.ebay.com/itm/BMW-DME-Motr...#ht_483wt_1295Leave a comment:
-
do you guys think this DME will work with my car? i need to get one.
http://www.ebay.com/itm/BMW-DME-Motr...#ht_483wt_1295Leave a comment:
-
now i am looking for a 325es 5 speed DME because the one that is in there now is from a 528e auto. anyone have one or know of one i can have?
thanksLast edited by SantaCruzE30; 08-13-2012, 09:16 PM.Leave a comment:
-
Thanks! i will check this out tomorrow!Last edited by SantaCruzE30; 08-12-2012, 09:38 PM.Leave a comment:
-
Had this happen a few times.
Bad fuel pump relay, middle one on the drivers side wheel well.
Coil is bad(my best bet)Leave a comment:

Leave a comment: