New SC member! M/S50 swapped 318.

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • e30TED
    replied
    Originally posted by matthugie
    Pick up an ejknight skid plate. I don't know if it would have saved you from that, but it will save you from pretty much anything else. I've beat the shit out of mine and it's still in good shape.

    That said, welcome!
    I'll definitely have to look further into that. I do wanna get one once I get on a track.

    Leave a comment:


  • matthugie
    replied
    Pick up an ejknight skid plate. I don't know if it would have saved you from that, but it will save you from pretty much anything else. I've beat the shit out of mine and it's still in good shape.

    That said, welcome!

    Leave a comment:


  • CrusherCurtis
    replied
    Welcome

    Leave a comment:


  • e30TED
    replied
    Originally posted by hedmisten
    Beast.
    Thanks man! Hope to see you Sunday in your dirty30 man!

    Originally posted by shEck3lls0
    Yes.... for sure the epitome of R3V. "Boost soon" Haha. Nice car and good luck.
    I'm a sucker for forced induction! lol

    Originally posted by 303e30
    That thing is sick, probably time for a skid plate haha
    skid plate probably would have just crumbled "/

    Originally posted by Blackout
    The low, high, auxiliary and fogs working like a champ up front. Bald tires in the rear. F**king Bravo man.
    Hahah oncoming traffic hate my lights, but I see everything! lol

    Originally posted by M-technik-3
    Skid plate would have saved it. Tires might have though. Who built it? Screen name or shop?
    Tires would have definitely saved it, when the brakes locked up I just slid since my tires had no traction. I bought the car from a guy named Kyle Drake.


    Also, thanks for all the kind words guys! It's definitely the most stellar e30 I've owned.
    Last edited by e30TED; 02-26-2013, 10:28 AM.

    Leave a comment:


  • M-technik-3
    replied
    Originally posted by 303e30
    That thing is sick, probably time for a skid plate haha
    Skid plate would have saved it. Tires might have though. Who built it? Screen name or shop?

    Leave a comment:


  • Blackout
    replied
    The low, high, auxiliary and fogs working like a champ up front. Bald tires in the rear. F**king Bravo man.

    Leave a comment:


  • 303e30
    replied
    That thing is sick, probably time for a skid plate haha

    Leave a comment:


  • shEck3lls0
    replied
    Originally posted by e30TED
    Is that so? lol thanks man! I've done some digging around on here, lots of good info and people! Once I get the oil pan and transmission taken care of, some low boost will come in the future.
    Yes.... for sure the epitome of R3V. "Boost soon" Haha. Nice car and good luck.

    Leave a comment:


  • hedmisten
    replied
    Beast.

    Leave a comment:


  • e30TED
    replied
    Here's an extensive modifications list:

    1991 318i with M/S50 drivetrain swap.

    > H+R OE Springs
    > Bilstein Sport Shocks
    > Poly eccentric rear trailing arm bushings and subframe bushings
    > Motorsport front control arms and bushings
    > Poly sway bar bushings with M3 rear sway bar
    > Cross drilled rotors and Hawk pads, rear bronze slides, braided lines
    > including clutch line

    > Stud kit and 4mm front wheel spacers
    > Dforce LTW5 Spec E30 wheels with 225 50 15 tires
    > Euro manual steering rack, solid steering guibo, non airbag steering column
    > conversion

    > 3.45 built differential, 40% lockup, polished gears and spiders,
    > cryogenically treated internals, Motorsport cover.

    > Poly engine and transmission mounts
    > Complete Air Conditioning delete
    > Factory keyless entry
    > Rear headrest/armrest leather seat
    > Sparco pro2000 seats with sliders
    > Sans OBC display from early model.
    > Sans rear window and lockout switch from early model
    > 4th "woah nellie" grab handle for driver
    > Motorsport lighted shift knob
    > Airbag delete with Motorsport 1 wheel
    > Euro side trim
    > Factory plate frames
    > Hella smoked headlamps with 100W bulbs
    > Smoked turn ignals

    > 2.8L bottom end, new BMW OE with approximately 60k miles, 2.8L engine is
    > under square and has forged crank.

    > 3.0 cylinder head, approximately 30k miles, fully redone by Turners' machine
    hop in Dover NH.

    > All BMW OE hardware and gaskets
    > Complete OBD1 harness and peripherals

    > Euro HFM, big injectors, Turner Motorsport tuning.
    > Top quality fluids used throughout drivetrain at all times.
    > OBD2 exhaust manifolds ceramic coated
    > Under drive pulleys
    > Welded oil pump nut, safety wired drain plugs.
    > ZF310 manual five speed, new BMW OE with about 50k. *
    > BMW OE M3 drive shaft, 50kish.
    > Short shifter, custom made from a bunch of kits, custom upper carrier
    > length.

    > EVO3 E30 M3 clutch and flywheel, 20k miles.
    > No leaks on any assemblies.
    > Dual engine grounds.
    > Custom exhaust, dual 2.5 inch pipes with resonators back to a Remus muffler (I have the remus at the house, have yet to put it on, I had that from my other E30 I kept)

    Leave a comment:


  • e30TED
    replied
    Originally posted by MattBimmer
    Whats up Theo! Welcome man, where you been I have seen you creeping around school here and there but not for long.
    What's up Matt, yeah I resigned from SWU last semester lol. Whenever I get the car fixed I'll be coming by! Feel free to come up to Greenville to check her out in the garage.

    Originally posted by Vtec?lol
    Wait, how do you know it won't go into reverse or into 5th gear without grinding if you blew your pan?

    also, do you have any specs on the build from the P.O?
    I tried to put it in reverse just sitting there, you know how you have to give an extra push to go into reverse, well that extra "push" won't even go, and with the car off the putting it in 5th gear it makes metal hitting metal sound. I think what may have happened is the oil pan got pushed back and knocked the bell housing to the transmission and possibly broke a transmission mount...I'll be getting under the car tonight and will keep all updated with pictures.

    Leave a comment:


  • Vtec?lol
    replied
    Wait, how do you know it won't go into reverse or into 5th gear without grinding if you blew your pan?

    also, do you have any specs on the build from the P.O?

    Leave a comment:


  • MattBimmer
    replied
    Whats up Theo! Welcome man, where you been I have seen you creeping around school here and there but not for long.

    Leave a comment:


  • e30TED
    replied
    Mounted them further out with little L brackets, easily bendable too.

    Leave a comment:


  • MikeDE
    replied
    My hood hits my Hella's when I have them mounted like that...what's your secret Cowboy??

    Leave a comment:

Working...