If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Definitely, especially for the injectors. Shoot me a message when you decide what route you're going
I believe im getting 24 lb injectors soon from a buddy. ill pm you when I get it figured out. And also talking with one of my favorite local media dudes about using some of his photos for your website. As long as they are copyrighted or what not.. Ill let you know how that works out too.
heres one that I just found from this past weekend.. More to come!!!
Went ahead and bought a new temp gauge, as well as a new oil pressure gauge.
I also had a neat little fuse box I was wanting to use...
some thin steel, snips, and a couple drill bits later...
Everythings wired thru the fusebox and works off of switched power.
I also got the time to put in my new SSSquid tuning 2.7I chip before last weekend
first notice is a lot smoother mid range curve, and an increased top end pull. After the track day and the ride home I can say I feel like I got a little bit better MPG ,
DEFIANTLY WORTH IT, AND HIS CUSTOMER SERVICE IS EXCELLENT!!!!
Car did well all day and gave little problems. put a hole in a rad hose coming off the bank but was easily fixed at the nearest parts store and didn't even miss a run group!
First event with the full I electrics and head rebuild and it ran great, stayed cool, and packed a serious extra punch.
Also paid the down deposit on my tandem cage yesterday which should be in the car and welded within the next few days!!
e46 control arms, cage, and hook up hydro brake are on the list before the first event of competition!
Thanks guys. It's been quite the roller coaster ride. Burnt clutch, blown diffs, broken rocker arms... But it's running the best it's ever had,
Currently working on getting a strictly 2.7i chip to see the advantages of that over stock.
Will post more pics and some drift event vids after work!
Alright guys, figured as the cheap old bmw I bought to be daily transformed into something much more amazing, I'd share and tell the story of this car.
Bought all stock from some kid in bham for 600 bucks!!
the ad made the car seem like a pos, but I didn't notice any major problems.
condor offset CABs fixed the only real problem the car had when I got it..
right after front short stroke coils.
1984 Schwarz 325e
dailyed it for about a year with no problems whatsoever.
had stock 2.7 diff and was perfect for the commute to work everyday.....
okay over all the boring shit..
right off the bat I loved the low end torque this car had. And as both my old corollas slowly started falling apart I found myself abusing the bmw more and more, till A POINT OF NO RETURN....
Most of these next pics were with a
stock 2.7.
Current setup:
motor
2,7 bottom end
low mile 885 head, freshly done up
motronic 1.3 swap
17lb injectors
2 in exhaust
cai :p
all routine maint done, t belt twice,water pump, all new seals, gaskets, head bolts,etc.
Drivetrain:
new stage 2 clutch
new zf tranny mounts
oem carrier bearing
low mile 3.73 LSD
Suspension & Steering:
front short stroke coils
bilstein hd from IX
cosmo springs
GC camber plates
IE 25mm sway bar
Condor m3 offset CAB
M3 Sway bar end link
steering rack spacer with rebuilt steering rack
New rotors and pads
1 in x100 to x114 hubcentric wheel spacer
Interior aka OFFICE
m tech 1 steering wheel
evolution reclinable bucket seats
razco short throw shifter
Currently awaiting tandem legal cage. ;D
Lots im forgetting and lots of money spent and random maint. that pops up.
Overall it served its purpose and IS A SIMPLE AND COST EFFECTIVE WAY TO GET SIDEWAYS ALL DAY LONG. Drive to the track, bash limiter all day, drive home....
Ill shut up and let the action shots take over.
Plan to do the local grassroots drift series with the car and current setup.
Future plans include tandem legal cage and turbo
Leave a comment: