New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Navarone
    replied
    Originally posted by Verdi
    Originally posted by Navarone
    Lookie lookie what I got!

    Maintenance records! You called it golde
    Any advice on tracking down old maintenance records?
    I got them from the previous owner. If you find any receipts or anything you could call the shop and see what records they still have. BMW probably has it all if it was taken to the dealer, but smaller shops probably purge old paperwork after taxes have been paid. I think you have to keep stuff for 3 years for tax reasons. Worth a try if you have any leads.
    Last edited by Navarone; 02-17-2015, 12:28 AM.

    Leave a comment:


  • Navarone
    replied
    Got almost all the glue off. The glue under the tint that kept breaking apart took a lot of elbow grease to get off, and it still has some residue but it's a million times better than the kaleidoscope I was looking through before.
    Click image for larger version

Name:	ImageUploadedByTapatalk1424144615.843407.jpg
Views:	1
Size:	107.2 KB
ID:	7173753

    Leave a comment:


  • Verdi
    replied
    old records

    [quote=Navarone;4170286]Lookie lookie what I got!

    Maintenance records! You called it golde


    Any advice on tracking down old maintenance records?

    Leave a comment:


  • Navarone
    replied
    The edges are a pain, they just fall apart. I had to sit there with a razor and carefully scrape the tint off being carful not to hit the defogger traces.
    Click image for larger version

Name:	ImageUploadedByTapatalk1424135360.151613.jpg
Views:	1
Size:	87.2 KB
ID:	7173750

    It's about %95 now. Just need to finish the bottom corners and clean off a little bit of glue.
    Click image for larger version

Name:	ImageUploadedByTapatalk1424135405.269583.jpg
Views:	1
Size:	109.0 KB
ID:	7173751

    The passenger side window and the two wing windows have tint also, but I'll save those for another day. The rear was the most important. It was a safety issue.

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    Time to remove the tinting. It's all wavy and dangerous at night. Dangerous because I can't tell if those are cop headlights!
    Click image for larger version

Name:	ImageUploadedByTapatalk1424130346.125271.jpg
Views:	1
Size:	103.5 KB
ID:	7173747

    Using a hair dryer. Almost too hot to touch, but isn't pulling the glue up with the tint. At least it softened it enough to keep the tint from coming off in tiny little pieces.
    Click image for larger version

Name:	ImageUploadedByTapatalk1424130407.014069.jpg
Views:	1
Size:	109.1 KB
ID:	7173748

    Rubbing alcohol worked great to take off the glue. Going to take a break then get back to work.
    Click image for larger version

Name:	ImageUploadedByTapatalk1424130443.265549.jpg
Views:	1
Size:	102.4 KB
ID:	7173749
    Last edited by Navarone; 02-16-2015, 05:11 PM.

    Leave a comment:


  • Navarone
    replied
    Originally posted by ArtFoodBMW
    Interested to see how the cup holders turn out!
    I might get those actual cup thick plastic solo cups and glue them in, but I'll probably end up using ABS pipe. The solo cups might not be big enough, I routinely get kidney busters of iced tea and need jumbo cup holders.

    Originally posted by KIRIEIW
    ^Wow what a mess cutting! Interested to see the final product.
    Yeah, the largest hole saw wasn't large enough. Had to do a lot of grinding.

    Originally posted by ak-
    That is the final product.

    Haha, I ran out of duct tape and bubble gum, so it's only half done.

    Leave a comment:


  • ak-
    replied
    That is the final product.

    Leave a comment:


  • KIRIEIW
    replied
    ^Wow what a mess cutting! Interested to see the final product.

    Leave a comment:


  • ArtFoodBMW
    replied
    Interested to see how the cup holders turn out!

    Leave a comment:


  • Navarone
    replied
    Stupid tapatalk.
    Click image for larger version

Name:	ImageUploadedByTapatalk1423969178.243510.jpg
Views:	1
Size:	106.2 KB
ID:	7173716
    Click image for larger version

Name:	ImageUploadedByTapatalk1423969190.580102.jpg
Views:	1
Size:	114.8 KB
ID:	7173717
    Click image for larger version

Name:	ImageUploadedByTapatalk1423969200.894941.jpg
Views:	1
Size:	115.0 KB
ID:	7173718

    Leave a comment:


  • Navarone
    replied
    Got some cup holders started.
    Click image for larger version

Name:	ImageUploadedByTapatalk1423969139.026414.jpg
Views:	1
Size:	106.3 KB
ID:	7173714

    Leave a comment:


  • Navarone
    replied
    Finally built a battery tie down! And decided not to sell the car.

    Click image for larger version

Name:	ImageUploadedByTapatalk1421797346.423467.jpg
Views:	1
Size:	103.4 KB
ID:	7173164

    Leave a comment:


  • Navarone
    replied
    I serviced the K&N and installed a new fuel filter, both were filthy! Car is a little more peppy and doesn't bog around 3k+. We'll see how it acts when cold. Might not be much different.

    Sadly when I popped the top hose off the fuel filter there was still pressure and it blasted me right in the eyes. Lost a set of contact lenses :(

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    Installed new alternator bushings and a new seal for the washer pump!

    Wow, doesn't look too hot.
    Click image for larger version

Name:	ImageUploadedByTapatalk1420079709.737353.jpg
Views:	1
Size:	114.7 KB
ID:	7172905

    The old bushings melted or devulcanized and were a pain to get cleaned up.
    Click image for larger version

Name:	ImageUploadedByTapatalk1420079537.676493.jpg
Views:	1
Size:	116.0 KB
ID:	7172901

    The casing was all gouged out from running so long with bad bushings.
    Click image for larger version

Name:	ImageUploadedByTapatalk1420079560.691455.jpg
Views:	1
Size:	106.7 KB
ID:	7172902

    Got the new ones in, and had to squeeze them to get the clips on.
    Click image for larger version

Name:	ImageUploadedByTapatalk1420079622.013294.jpg
Views:	1
Size:	106.0 KB
ID:	7172903

    Put one of the sleeves in backwards, good thing I double checked before installing in the car!
    Click image for larger version

Name:	ImageUploadedByTapatalk1420079655.016217.jpg
Views:	1
Size:	108.5 KB
ID:	7172904

    Leave a comment:


  • Navarone
    replied
    Hrm, there's still condensation inside the trunk lid but I can't find where any water is leaking in. Next fix is probably antenna. I have someone asking to look at the car Friday. Hopefully he doesn't flake.

    Leave a comment:

Working...