New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    New batteries for the glovebox flashlight came today!! 120lm led still in the mail. Can't wait for the led, this bulb is totally useless in a flashlight.
    Click image for larger version

Name:	ImageUploadedByTapatalk1427520405.851788.jpg
Views:	1
Size:	102.4 KB
ID:	7175980

    Prep. I didn't get a battery with solder tabs, but the tab with the blue wire spot welded to it doesn't let solder stick anyway.
    Click image for larger version

Name:	ImageUploadedByTapatalk1427520417.035501.jpg
Views:	1
Size:	115.5 KB
ID:	7175981

    Bent the tab for some tension, and held in with tape long enough to glue the cover closed with a couple drops of super glue.
    Click image for larger version

Name:	ImageUploadedByTapatalk1427520501.709782.jpg
Views:	1
Size:	112.8 KB
ID:	7175982

    Woo hoo!!
    Click image for larger version

Name:	ImageUploadedByTapatalk1427520516.160991.jpg
Views:	1
Size:	109.1 KB
ID:	7175983

    Tried to clean the yellowing. BMW logo came off, yellow didn't. Oh, and I hate superglue so much!! What a life.
    Click image for larger version

Name:	ImageUploadedByTapatalk1427520556.081901.jpg
Views:	1
Size:	115.6 KB
ID:	7175984

    Oh, and here's the LED I bought. $15.... hrm.
    http://www.ebay.com/itm/271797982808
    Last edited by Navarone; 03-28-2015, 04:07 PM.

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    New headlight came in the mail from autozone.
    Click image for larger version

Name:	ImageUploadedByTapatalk1427131102.633233.jpg
Views:	1
Size:	104.2 KB
ID:	7175910

    Exact match to my old one. Hella 304-115 704 other number is 50R-00514 cost $34 shipped.
    Click image for larger version

Name:	ImageUploadedByTapatalk1427131133.119032.jpg
Views:	1
Size:	110.7 KB
ID:	7175911

    Came with boot, no bulb, used my old one.
    Click image for larger version

Name:	ImageUploadedByTapatalk1427131143.102521.jpg
Views:	1
Size:	108.2 KB
ID:	7175912

    Only a few Phillips screws and it was out and in. Didn't even open the hood all the way.
    Click image for larger version

Name:	ImageUploadedByTapatalk1427131202.991183.jpg
Views:	1
Size:	107.0 KB
ID:	7175913

    Now it looks too good compared to the others, better break it or something!
    Click image for larger version

Name:	ImageUploadedByTapatalk1427131230.427136.jpg
Views:	1
Size:	106.6 KB
ID:	7175914
    Last edited by Navarone; 03-23-2015, 09:46 AM.

    Leave a comment:


  • Navarone
    replied
    Installed the new ground strap and cut the carpet to fit.
    Click image for larger version

Name:	ImageUploadedByTapatalk1427070939.673605.jpg
Views:	1
Size:	114.1 KB
ID:	7175890

    Leave a comment:


  • Navarone
    replied
    Helping my buddy clean shop, look what he hooked me up with!

    Now I can fix the battery and the crusty grounds from the old tray.
    Click image for larger version

Name:	ImageUploadedByTapatalk1427043675.489589.jpg
Views:	1
Size:	108.6 KB
ID:	7175876

    Leave a comment:


  • 2mAn
    replied
    Originally posted by Navarone
    Ok, thanks! I don't want to weld anything so I'll just get a longer battery cable and use a bolt. Not a fan of messing up paint if I don't have to.
    Get a longer ground cable and bolt it to the rear shock mount. just make sure its clean metal and the ground will be fine

    Leave a comment:


  • Navarone
    replied
    Ok, thanks! I don't want to weld anything so I'll just get a longer battery cable and use a bolt. Not a fan of messing up paint if I don't have to.

    I did drill a hole to lock down the tray though.
    Click image for larger version

Name:	ImageUploadedByTapatalk1426879251.126730.jpg
Views:	1
Size:	93.0 KB
ID:	7175858

    Leave a comment:


  • 2mAn
    replied
    Originally posted by Navarone
    I can't seem to find a good picture of how it's supposed to be grounded. Someone said the bolt for the bumper mount. Neither of my cables reached any bolts :/


    This is a crappy pic of what I had to do

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    I can't seem to find a good picture of how it's supposed to be grounded. Someone said the bolt for the bumper mount. Neither of my cables reached any bolts :/

    Leave a comment:


  • 2mAn
    replied
    edit: you posted before I did!

    I had an extra rear valence I yanked the stock ground lug from...

    The car used one of the rear shock mounts as a ground for a long time

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    Getting this grommet in was such a huge pain in the ass. I ended up pulling the cable through then putting the grommet on and pushing it in backwards.
    Click image for larger version

Name:	ImageUploadedByTapatalk1426834662.308800.jpg
Views:	1
Size:	105.4 KB
ID:	7175854

    Got a little rough with it, but it's still serviceable.
    Click image for larger version

Name:	ImageUploadedByTapatalk1426834707.662990.jpg
Views:	1
Size:	111.3 KB
ID:	7175855

    Can you spot what's wrong?!
    Click image for larger version

Name:	ImageUploadedByTapatalk1426834740.449240.jpg
Views:	1
Size:	108.3 KB
ID:	7175856

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    Got the battery relocated, here's why.

    Shock tower falling apart.
    Click image for larger version

Name:	ImageUploadedByTapatalk1426834490.580514.jpg
Views:	1
Size:	110.9 KB
ID:	7175851

    Firewall, also falling apart.
    Click image for larger version

Name:	ImageUploadedByTapatalk1426834499.861928.jpg
Views:	1
Size:	99.0 KB
ID:	7175852

    This is inside the footwell.
    Click image for larger version

Name:	ImageUploadedByTapatalk1426834575.685645.jpg
Views:	1
Size:	105.2 KB
ID:	7175853

    Luckily that's the ONLY rust on this CA car. Oh my.

    Leave a comment:


  • Navarone
    replied
    I'm so excited! I'm so scared!
    Click image for larger version

Name:	ImageUploadedByTapatalk1426579842.823145.jpg
Views:	2
Size:	105.6 KB
ID:	7175728

    Leave a comment:


  • Navarone
    replied
    Mmmmmm yum!

    Click image for larger version

Name:	ImageUploadedByTapatalk1426375676.605567.jpg
Views:	1
Size:	112.3 KB
ID:	7174108

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    Did an oil change and checked the spark plugs.

    All four had the same coloration, and correct gap, only this one right under the oil filler cap had oil on the threads. They're autolite platinum and I have some kinda fireball or tnt or something high power coil with Taylor wires. Number 2 boot wasn't seated all the way, the little screw terminal on the spark plug wasn't on, just stuck in the boot. No signs on that plug that it wasn't working anyway :/
    Click image for larger version

Name:	ImageUploadedByTapatalk1425852846.077712.jpg
Views:	1
Size:	110.6 KB
ID:	7174040

    This is just so I'll know when I did my oil change. Easier than writing it down and losing it. My grandpa always had a notebook with every single thing he did for maintenance... That's overkill for me maybe. I did reset the service indicator, so there's that?
    Click image for larger version

Name:	ImageUploadedByTapatalk1425852998.458355.jpg
Views:	1
Size:	116.0 KB
ID:	7174041

    Leave a comment:


  • Navarone
    replied
    New member, my first E30, from the Bay Area. NEW QUESTIONS EVERY DAY!

    Put it in the car and aligned it and took a measurement to align it on the table while gluing.
    Click image for larger version

Name:	ImageUploadedByTapatalk1425623221.275189.jpg
Views:	1
Size:	111.8 KB
ID:	7174001

    Took a depth measurement for the inserts. I've made one but it takes a while to shrink it so it's a nice fit.
    Click image for larger version

Name:	ImageUploadedByTapatalk1425623253.844879.jpg
Views:	1
Size:	101.2 KB
ID:	7174002

    Grinded the center part and started gluing it in.
    Click image for larger version

Name:	ImageUploadedByTapatalk1425623303.699804.jpg
Views:	1
Size:	109.5 KB
ID:	7174003

    Ran out of glue and went to get more. Are bmw drivers just totall asshats or what?!
    Click image for larger version

Name:	ImageUploadedByTapatalk1425623379.906079.jpg
Views:	1
Size:	102.3 KB
ID:	7174004

    With tons of glue and some filler pieces of plastic I started closing up the gaping holes.
    Click image for larger version

Name:	ImageUploadedByTapatalk1425623414.459625.jpg
Views:	1
Size:	102.6 KB
ID:	7174005

    Going to get another tube of spunk and glue the inside corners then start body working the outside. I think I'll paint it with the same plastic bumper paint I used before, or maybe a hammered finish. I was looking at the stone textured that I could cover with rustoleum's version of plastidip. That would be sorta soft touch but textured. We'll see.

    Oh, and I noticed that the rear window defogger is working on all lines except the second from the top. Haven't looked for the break yet.
    Last edited by Navarone; 03-06-2015, 12:09 AM.

    Leave a comment:

Working...