Project Slap a Hoe

[bangn]

that dump is stupid. butchered a nice car and apron.

Typical S13 owner approach to modifying.

[E30_Narek]

Whats a cookie???

Probably the same thing as a donut lol

[steve68]

Whats a cookie???

[DER E30]

I like your exhaust

[e30onBBSs]

Sweet build, my future plans! 327i + turbo

[ThrobbinHood]

Thanks..

[JJe30]

Welcome to r3v

[ThrobbinHood]

"I" head, waiting to go to the shop to get all cleaned up and setup for my build. Once I get it back ill post up the specs.



Head studs





Cleaned the tranny up and bought a spec stage 3.5 clutch setup



B27 block with forged h81 crank and flat top pistons and ARP Studs.

This is how the car is as of now.. I should have parts showing up for the next few weeks as I get into painting everything and putting the motor back together.

[ThrobbinHood]

Decided I wanted to turbo it. So as it sits its in that process.






I finished up my turbo setup installed and put it on the dyno for testing and to make sure everything I did was good before really tearing into it to build the motor.




I was curious to see what it would do fairly stock with 60mill turbo, 24lb injectors and cam and stock fuel system. Tuned maxed out at 12psi it was a whopping 181hp and 280fpq at 3800rpm.. Injectors were maxed out and hitting their limit and clutch was slipping.

VIDEO OF CAR RUNNING

https://www.facebook.com/drew.anthony.5/videos/10200774581843936/

So the fun begins

[ThrobbinHood]

This is after ground control suspension and 17" wheels. No photos of the install but will update later on when i get to redoing the suspension again.

[ThrobbinHood]

So I have had this car for a few years now. Never really had any interest in doing stuff to it.. I got it on a trade for building a rally spec cage in a DSM then gave the car to my girl friend to drive. She drove it around for about 2 years till we thought it blew a head gasket so it got parked for about 6 months before I decided to check it out cause I wanted to go do cookies and burn outs.

After looking into it and realize it was not a bad head gasket I started to thinking about building the car up.. No now here I am pay check to pay check and day after day working on this car like a drug.

So far i have done a bit to the car with out any photos just stories but the plan is to redo this car inside and out.. Also as i do this build just for my own knowledge and with out relying on he said she said I have done a few things up to this point just because I was curious.

I will try to do as many photos and videos as I can cause I know most people hate reading and photos are better.

Here is a pic of the car and my side side kick that does all the work.





As of right now the car is apart in my shop..

I will go though my photos to update to the point Im at with it now.