89is Alpine Progress Thread: e30 Hibernation - e90 swap complete

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • wworm
    replied
    Just FYI I’m running LED tail light bulbs and low beams and they all trip the check panel


    Sent from my iPhone using Tapatalk

    Leave a comment:


  • jeenyus
    replied
    when you replace those window rubber pieces, will you document how and whatever? I have been wanting to replace mine for a while now.

    Leave a comment:


  • jeenyus
    replied
    great progress! awesome project

    Leave a comment:


  • VBe30
    replied
    Bronzit is sold

    Bittersweet, but sold the Bronzit off today. It will be shipped to upstate New York via trailer for the next owner to enjoy. Older gentleman wanted a project to work on with his son. Very nice guys. The brother in law is actually handling the shipping for him. Also a fellow e30 and 2002 owner.

    Leave a comment:


  • VBe30
    replied
    https://superbrightleds.com

    I picked them up to basically test them out. I think I’ll be ordering the rest of the tail light bulbs and front turn signals and maybe even high beams. If they trip the check panel, I’ll go back to stock though.

    Leave a comment:


  • stonea
    replied
    Link to the LED lights you used?

    Leave a comment:


  • VBe30
    replied
    Update

    Car passed inspection after the second visit - forgot to check all the bulbs before I took it in. So we are good for another year. In the past month I've done a few more suspension upgrades and blew my load on black friday. As always, pictures speak for themselves.

    Picked up some treehouse CABs and gave them some love.

    Before


    After - Metallic silver paint (same color as my swaybars) and a fresh Condor replacement bushing



    Switched from control arm mounted swaybar end-links to strut tube mounted endlinks from CaTuned. I had originally ordered Garagistic, but they were too long and I could not shorten them.


    Picked up some IE swaybar mounts for the 21mm convertible bar I have installed.



    Upgraded to LED reverse lights



    Black Friday Deals - Blunttech hooked it up with their OE BMW parts sale. Picked up IS side skirts and hardware, Window Guide rubbers, outer rubber for door window, and a 1 piece sunroof gasket.

    Leave a comment:


  • VBe30
    replied
    Alpine

    Originally posted by stonea
    Great job so far! Hopefully I'll be going down the same route with my car here shortly.
    Nice, Hopefully I'll see it around the 757 or run into you again at PnP

    Originally posted by parkerbink
    Nice progress!
    Thanks Man!
    Originally posted by getouth
    nice work sub'd
    Thanks

    My registration came due, so I re-upped with a custom plate. I'll probably keep it for a year then toss some Antique plates on.



    Leave a comment:


  • getouth
    replied
    nice work sub'd

    Leave a comment:


  • parkerbink
    replied
    Nice progress!

    Leave a comment:


  • stonea
    replied
    Great job so far! Hopefully I'll be going down the same route with my car here shortly.

    Leave a comment:


  • VBe30
    replied
    Weekend Update

    Well the weekend came and went, but I was able to knock a few things off my to-do list for the Alpine.



    Replaced the hood strut



    New plastic lock cylinder trim



    Rolled the rear fenders. Tool is absolute shit, but got the job done. Lowered it a few inches while I was in there.



    Rear fitment



    Front fitment



    New Ride height




    Bled the brakes with my new Motive power bleeder



    Tried to fix the High pressue Power Steering leak. I had to remove the resevoir to rack line to access the -AN fitting for the chase bays line. I was able to tighten it down a bit more..time will tell..



    New battery. Bronzit battery died...so the Alpine gets the new Bosch and Bronzit gets the older Interstate.




    Washed up and sitting pretty



    Sunroof Panel sitting and waiting for me to order new gaskets and give it a fresh coat of paint.

    I need to get the Alpine inspected this week..it ran out in September. I had been delaying due to the tires hitting the rear fender wells and peeling away like a string cheese. Everything should pass hopefully...

    Leave a comment:


  • oekundar
    replied
    Love the progress on the car...can't wait to see the continued progression.

    Leave a comment:


  • IronJoe
    replied
    Looks good! Love an alpine coupe :D

    Leave a comment:


  • VBe30
    replied
    Originally posted by 2mAn
    Not bad
    Thanks dude

    Leave a comment:

Working...