So i had been looking for wheels off and on for awhile. Just decided to jump on something. I will need to put spacers on to fit some real tires on them soon (et 35 sucks). But i think it looks pretty good. Also got a 3.73 lsd installed in place of my 3.25. Welded in a Borla muffler too, still with 325i catback.
im going to be doing the paintwork soon, then it gets a clutch and flywheel, trans needs resealed, heater core will be replaced, rear door cards installed, mhw front turn signals and a few little odds and ends, then it should be set for awhile.
Heres a few I took at school for those interested.
02 745Li, for those that know about these cars, this is where they spend 50 percent of their life (hooked to a gt1)
e91 getting buttoned up after an evaporator housing removal.
this was the car I was working on. R+R evap housing. Its an e46 325xi touring. Not quite as bad as it seems, had it in an out in a few hours.
im going to be doing the paintwork soon, then it gets a clutch and flywheel, trans needs resealed, heater core will be replaced, rear door cards installed, mhw front turn signals and a few little odds and ends, then it should be set for awhile.
Heres a few I took at school for those interested.
02 745Li, for those that know about these cars, this is where they spend 50 percent of their life (hooked to a gt1)
e91 getting buttoned up after an evaporator housing removal.
this was the car I was working on. R+R evap housing. Its an e46 325xi touring. Not quite as bad as it seems, had it in an out in a few hours.
Comment