New v8 Exhaust pics :) Grrrrrrrrrrrrrrr

[drifty340i]

Im really happy with how the exhaust is looking so far, full extractors,4 into 1 on each side, then onto twin 2.25 inch pipes, merging into 1 2.5inch pipe,1 high flow resonator,1 high flow rear muffler with twin DTM tips. All mandrel bent and really clean looking welds,should flow really well and the sound will deep and clean (no crackel) also no drone.We put alot of research into this system (not finished in these photos)

What do you guys think?

Riley

[4ce30]

only the first one works.. looks like an EBAY muffler?
-Brandon

[drifty340i]

Here is a example of Bens work

[drifty340i]

only the first one works.. looks like an EBAY muffler?
-Brandon

Was a cheap muffler,(we only wanted the exterior stainless steel case and the tips) we totally gutted it and rebuilt it to our specs so it will sound really good.

[drifty340i]

heres the merge pipe. we tidyed up the welds even more so it looks really sharp now

[Julien]

only one thought.. is 2.5" big enough?

[4ce30]

Why not just buy a normal high flow muffler such as Borla, Remus, Flowmaster, ect rather than taking a shitty stainless muffler apart and spending a shitload of time building a muffle inside? Just seems backwards to me, but i'd like to hear a sound clip for sure before i could say it was a total waste!:)
-Brandon

[drifty340i]

And here are the front pipes comming down from the extractors :)

[drifty340i]

Why not just buy a normal high flow muffler such as Borla, Remus, Flowmaster, ect rather than taking a shitty stainless muffler apart and spending a shitload of time building a muffle inside? Just seems backwards to me, but i'd like to hear a sound clip for sure before i could say it was a total waste!:)
-Brandon

Didnt have access to them, very hard to get here.It should be fine,its only the case we are using and the case is well made. Im not sure if this is the same muffler as on ebay. If it dont sound good ill change it lol this is my toy and ill waste money on it at will

[Bill-B]

that is bad ass

[4ce30]

this is my toy and ill waste money on it at will

You asked my opinion i gave it! if you want to waste some more money let me know my pockets are always open...:up:
-Brandon

[drifty340i]

only one thought.. is 2.5" big enough?

Sure is, a good 2.5 will flow 350hp. Standard on these engines is 2inch at its smallest point and factory they have about 5 mufflers and very retrictive bends. 2.5 will hold good tq at low revs and not restrict and high revs,

It might lose 4-5hp at 6500rpm compared to a 3inch,but will have more power down low and it wont sound droney like a 3inch.

[drifty340i]

You asked my opinion i gave it! if you want to waste some more money let me know my pockets are always open...:up:
-Brandon

lol :) i love wasting money on ma car. Need lasic eye surgery tho :( 6 grand

[rennegade]

Looking good, its a lexus V8 right? Remus's pop up everynow and then on trademe. Must post a sound clip when its running!

[Doughnut]

Clean arse welds!

Must post a sound clip when its running!

+1.