Originally posted by tonton
View Post
Announcement
Collapse
No announcement yet.
325i cabrio -90 s38 swapped, COTM March -16
Collapse
X
-
E30 S54 Turbo
E30 S38 Turbo Cabrio
E28 530 2JZ-GTE
We can be found at facebook.
http://www.facebook.com/pages/Mystin...66319770141043
-
-
winter updates
BBK and redone wiringharnes
old
stock
new
front:
-transporter t5 rear rotors 294x22
-e36 328 caliber
rear:
-e36 328 rear rotors 274x12 (280x12)
-e36 318ti caliber
Can use with 7x15" et24 style5s
Last edited by tonton; 12-02-2014, 09:40 AM.
Comment
-
wow that engine bay looks serious! bet its really fun!91 DS S52 Slicktop, 91 Calypso M42, 89 Royalblau M20, 84 Bahama Beige 323i, M535, Euro e24, ap1
www.RenownUSA.com
ig @RenownUSA / @rude.scott
Comment
-
Comment
-
Hello there.........
Nice to see a S38B36 in an E30 engine bay,,,,,,,,, and a cabrio to.............. rare swap
you mentioned airfilter!!!!!!!!!!
i did it like this.. ,, i swapped the S38B38 in to the car in 2007,,drove it for 6 years with that engine
this is the oem E34 M5 airbox,,, a heating gun was used to get the plastic soft and then press on the ABS unit... a superb fit,, and a solution as close to OEM as possible ,,imo
i had to shorten the rubberhose a little for fitment,,,,
i wish you all the best with this car and engineSveinbjörn Hrafnsson
E30 CABRIO V12 M70B50 ///
ALPINA B10 BITURBO 346 @ 507
E34 550 V12 JML
Finnish wisdom : If you want to Win,, hire a Finn
http://alpina.123.is/pictures/
Comment
-
thanks
I have looked at your engine bay pics few times, nice work :up:
thinking about that filter box.
don`t want cut that new rubberhose
and the box is ugly
I've been thinking if i cut completely in front of out of the box
like it would go in line with that front panel
i don´t have any moorings left so then i could
attached to the front panel
then put some cover on top of box
other option is alphaN and carbon/fiber/al airbox with some filter??Last edited by tonton; 01-11-2015, 03:25 PM.
Comment
-
Originally posted by tonton View Postthanks
I have looked at your engine bay pics few times, nice work :up:
thinking about that filter box.
don`t want cut that new rubberhose
and the box is ugly
I've been thinking if i cut completely in front of out of the box
like it would go in line with that front panel
i don´t have any moorings left so then i could
attached to the front panel
then put some cover on top of box
other option is alphaN and carbon/fiber/al airbox with some filter??
opened the airflow,, made a square funnel ,, and had the finest net available used the oem velocity stack that is inside the oem airfilter box......... and got a better sound than the E46 M3 CSL,,,, but when improving airflow,, the fuel was not improved,, as i drove ALPHA-N,,, so 2 pistons got toasted,, and a total engine rebuild,, boring the block etc etc
VERY expensive
so if you use ALPHA-N,,, do not change the intake system AT ALL after remapping the carSveinbjörn Hrafnsson
E30 CABRIO V12 M70B50 ///
ALPINA B10 BITURBO 346 @ 507
E34 550 V12 JML
Finnish wisdom : If you want to Win,, hire a Finn
http://alpina.123.is/pictures/
Comment
Comment