My e30 runs 10s!!!!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • e30this
    No R3VLimiter
    • Dec 2007
    • 3580

    #136
    So a 16x10 with a 6 inch back spacing would also work? Thats about a +12
    I mean it wont have as much poke as you but its still a 10 and this might allow me to run a 225 instead of a 215. Do you know how much space you have between the back of the wheel and the shock?

    Im trying to squeeze as much tire and wheel in there as I can.

    Comment

    • Erick
      Official R3V Drifter
      • Oct 2003
      • 11169

      #137
      Because you've PMed me with your suspension, I can tell you without heavy fender modification you can't pull it off.

      Even a 16x10 +12 with 215/45.. hell... possibly 205/40 (seen it done) would have a hard time. I could barely even drive the car with that setup. Literally putting a pair of tires in the trunk caused the car to start scrubbing the tires when I went past 10mph.

      If you want a 16x10 with a 225, you will need a seriously stiff suspension (almost solid), possibly compromising handling, and still need considerable fender work.
      Erick Mahle | FullOpp Drift | YouTube
      EurostopUSA | Dunlop Tires | Ireland Engineering | EnthusiastApparel | Ground Control

      ..::Support FullOpp::..
      FullOpp Stickers for sale!
      NEW | Enthusiast Apparel T-Shirts! | NEW
      Feedback Thread

      Originally posted by Mr. Anderson
      ...one of the most hardcore E30's around. :D

      Comment

      • e30this
        No R3VLimiter
        • Dec 2007
        • 3580

        #138
        I did have plans, if I had to. Was to cut the inner fenders and push the wheel well out if need be. So Im not scared to cut, bend, fab, plasma, weld, and grind anything that I have to. :)

        Comment

        • Erick
          Official R3V Drifter
          • Oct 2003
          • 11169

          #139
          Then by all means... be ready for a lot of it :p
          Erick Mahle | FullOpp Drift | YouTube
          EurostopUSA | Dunlop Tires | Ireland Engineering | EnthusiastApparel | Ground Control

          ..::Support FullOpp::..
          FullOpp Stickers for sale!
          NEW | Enthusiast Apparel T-Shirts! | NEW
          Feedback Thread

          Originally posted by Mr. Anderson
          ...one of the most hardcore E30's around. :D

          Comment

          • sirsteezo
            E30 Addict
            • Jul 2007
            • 577

            #140
            whens the photoshoot?

            Comment

            • Erick
              Official R3V Drifter
              • Oct 2003
              • 11169

              #141
              Well, considering this car was chopped in half and junked about 3 weeks ago, it'd be kind of tough to see that happen :p

              New car's coming soon though :)
              Erick Mahle | FullOpp Drift | YouTube
              EurostopUSA | Dunlop Tires | Ireland Engineering | EnthusiastApparel | Ground Control

              ..::Support FullOpp::..
              FullOpp Stickers for sale!
              NEW | Enthusiast Apparel T-Shirts! | NEW
              Feedback Thread

              Originally posted by Mr. Anderson
              ...one of the most hardcore E30's around. :D

              Comment

              • e30this
                No R3VLimiter
                • Dec 2007
                • 3580

                #142
                So then a 16x10 +12 should work. Not as much poke and a little easier to fit with the 215/45..... :)
                Im going to order one wheel and tire to test fit tomorrow and go from there.
                Thanks for all your help and answering all of my questions.
                Last edited by e30this; 04-20-2009, 02:28 PM.

                Comment

                • e30devo
                  E30 Enthusiast
                  • Aug 2005
                  • 1102

                  #143
                  Originally posted by Erick
                  Well, considering this car was chopped in half and junked about 3 weeks ago, it'd be kind of tough to see that happen :p

                  New car's coming soon though :)
                  sorry what?

                  Comment

                  • Erick
                    Official R3V Drifter
                    • Oct 2003
                    • 11169

                    #144
                    We're going with 16x12 now? I'd really like to be there in person to test how not scared of cutting you'll be when these get test-fitted. :p
                    Erick Mahle | FullOpp Drift | YouTube
                    EurostopUSA | Dunlop Tires | Ireland Engineering | EnthusiastApparel | Ground Control

                    ..::Support FullOpp::..
                    FullOpp Stickers for sale!
                    NEW | Enthusiast Apparel T-Shirts! | NEW
                    Feedback Thread

                    Originally posted by Mr. Anderson
                    ...one of the most hardcore E30's around. :D

                    Comment

                    • Erick
                      Official R3V Drifter
                      • Oct 2003
                      • 11169

                      #145
                      Originally posted by e30devo
                      sorry what?
                      Yeah, it hurt me a bit inside. I took pictures with my phone but never managed to post them up.
                      Erick Mahle | FullOpp Drift | YouTube
                      EurostopUSA | Dunlop Tires | Ireland Engineering | EnthusiastApparel | Ground Control

                      ..::Support FullOpp::..
                      FullOpp Stickers for sale!
                      NEW | Enthusiast Apparel T-Shirts! | NEW
                      Feedback Thread

                      Originally posted by Mr. Anderson
                      ...one of the most hardcore E30's around. :D

                      Comment

                      • e30devo
                        E30 Enthusiast
                        • Aug 2005
                        • 1102

                        #146
                        Originally posted by Erick
                        Yeah, it hurt me a bit inside. I took pictures with my phone but never managed to post them up.
                        i think everyone will be a little hurt but i think you owe it to us to post them up.

                        Comment

                        • e30this
                          No R3VLimiter
                          • Dec 2007
                          • 3580

                          #147
                          Originally posted by Erick
                          We're going with 16x12 now? I'd really like to be there in person to test how not scared of cutting you'll be when these get test-fitted. :p
                          Fixed, Sorry about that. :p

                          Im not scared of cutting.

                          Comment

                          • bumblebeemer
                            Wrencher
                            • Dec 2005
                            • 224

                            #148
                            pics pics pics, i loved that 4 door why did u scrap it?

                            Comment

                            • Fel
                              Wrencher
                              • Jun 2008
                              • 246

                              #149
                              WTF? Story!!

                              "He speaks French..... in Russian."

                              Comment

                              • Jonny Cash
                                E30 Mastermind
                                • Sep 2008
                                • 1763

                                #150
                                Originally posted by Erick
                                Your insane
                                -Jay

                                2014 NASA FL se30 champ #81
                                2001 se46 3 year plan in progress


                                Comment

                                Working...