Show off the Diamantschwarz

[Isostar13]

Just rinsed off the salt and sand...

[freeride53]

Back in late December.

[jasonbk]

[IronmanE30]

1991 Mtech in process of being restored.


Ronals


BBS RS 001


Hartge

Cheers,

Jim

[e30_neverstock]

[ATTACH]52418[/ATTACH]

[ATTACH]52419[/ATTACH]

[freeride53]

Dinos by sina.pour, on Flickr


Alamodo by sina.pour, on Flickr

[dchun]

Back in late December.

nice!

[freeride53]

Thanks dude! The paint is flaking on the drivers fender, and the bumper is also faded and cracked, but I strive to keep my car looking nice and clean.

[bmwscaner]

my DS e30






me , my car and my cane corso ALL BLACK SETUP :D

[euroshark]

Should do a thread hey?
Sorry to threadjack....
Preamble....I have wanted a 325is since I was in grade 1 when they were about. A teacher at my school had a 1989 in 1989 and I thought it was cool.
I wanted this car, from the 1989 catalog I kept as a kid

So I went and found one and purchased this 2 owner car in 2008

Started to do 'things' to it.

Basic specs
- 1989 325iS
- S50B30 euro
-- effectively rebuilt (85% new bits)
-- DTM carbon air plenum
-- Big Earl's oil cooler
-- H&H Alpha N tune
-- a fair whack of VAC Motorsports bits
-- OCD modified OEM euro headers (40 hours labour) and twin 2.25 system by Meridian Motorsport
- G260 w/ custom boxed in trans mount
- Just about every solid product AKG make including DTM shifter
- AST 4210 coilovers
- Z3 steering rack w/ custom lines
- Custom swaybars & mounts. M3 front pickup point
- MZ3 diff, extra lock up, 3.91, MZ3 finned diff cover
- Reinforced here and there. New tailshaft etc
- Massive Brakes. Front SL6R, Rear SL4R calipers. 300x32mm floating discs front and rear. Custom air ducts for cooling.
- Treehouse lollypops & swap adapter (well made)
- Recaro Sportster CS and Profi SPA seats. Sabelt harnesses. Harness bar by Meridian Motorsport.
- Stack pro control gauges
- Lots and lots of stuff replaced with new bits. "the chassis is original"
- 1/2 gallon surge tank w/ Bosch 044, Magnafuel filter, Teflon aeroquip hose etc
- Forgeline GA3 custom wheels. 17x7.5 ET22. 4x100. Continental Extreme COntact DW. Street wheels.
- O.Z Alleggrita HLT track wheels. 16x7. Yoko A048 225/45/16
- Hidden in the secret bat cave w/ a million security features
Minor fuelling issue at the moment, little bit rich down low. Runs like a champ from 5000-8500rpm however. Should have this ironed out by weeks end.
It's fun to drive. :)

Meridian Motorsport are awesomely good. They are true fabricators, not just welders

Exhaust has a few unique features. The rear section is solidly mounted to the chassis rails via a nice saddle brace and flexes via flex joints. This stops the exhaust wobbling about on fast corners etc.

Front section mounts to trans mount and a little further back on rubber to facilitate some movement. Moot point now as engine is on solid alloy mounts.






THE THREADJACK IS OVER

[leegf]

http://forums.eurocca.net/showthread.php/39188-Obligatory-project-thread.-E30-S50

[e30_neverstock]

[ATTACH]52581[/ATTACH]

[ATTACH]52582[/ATTACH]

[shifty]

I've been lurking for a bit, and figured I should get off my ass, register, and post.

I picked this '88 ix a while back, complete with damned near immaculate interior. There's work to be done, but at least it's pretty to start with. :)

[Eurospec]

[freeride53]

^ That's dschwarz?