Announcement

Collapse
No announcement yet.

Newman's E30/Skyline swap thread

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cplagz
    replied
    Originally posted by newman View Post
    Wheelspeed should be pretty easy.
    I'm looking into retrofitting 2x ABS wheel speed sensors. I have to get under a E30 with ABS to have a look how it's all setup though.

    Leave a comment:


  • newman
    replied
    GRRR, called the trans place where I took the gearbox and they said he can't look at it til at least friday... of next week. :(

    Leave a comment:


  • newman
    replied
    Originally posted by cplagz View Post
    From the diff sensor? Thanks for that - be good to get it on my aimdash.

    I was talking about wheel speed though - for traction/launch control :)
    Wheelspeed should be pretty easy.

    Leave a comment:


  • cplagz
    replied
    Originally posted by newman View Post
    The titanium wrap is awesome...

    Feeding the speed signal in is simple, it's already done. Just use a 5v power supply with a 1K pull-up resistor to one side of the speed sensor and ground the other side (use a sensor ground, not a chassis ground). Tap the ecu speed signal in between the resistor and the sensor, so that it pulls to ground when the sensor is closed...

    simple as that.
    From the diff sensor? Thanks for that - be good to get it on my aimdash.

    I was talking about wheel speed though - for traction/launch control :)

    Leave a comment:


  • ubernasty
    replied
    video was great

    Leave a comment:


  • newman
    replied
    Originally posted by cplagz View Post
    Let us know how you get on with feeding a speed signal into the ViPEC, I also have a V88, but won't get any time to play with it until later this year :(

    How do you find the DEI Titanium wrap? I'm tossing up between that and Heatshield Products inferno wrap.
    The titanium wrap is awesome...

    Feeding the speed signal in is simple, it's already done. Just use a 5v power supply with a 1K pull-up resistor to one side of the speed sensor and ground the other side (use a sensor ground, not a chassis ground). Tap the ecu speed signal in between the resistor and the sensor, so that it pulls to ground when the sensor is closed...

    simple as that.

    Leave a comment:


  • cplagz
    replied
    Let us know how you get on with feeding a speed signal into the ViPEC, I also have a V88, but won't get any time to play with it until later this year :(

    How do you find the DEI Titanium wrap? I'm tossing up between that and Heatshield Products inferno wrap.

    Leave a comment:


  • jasonsnoddy
    replied
    i am a fan of this car. that is all.

    Leave a comment:


  • newman
    replied
    I can't go. The trans is out of the car... the input shaft was making some noise, I want to be proactive about it, because GTR cases aren't exactly simple to come by, so I can replace a 20 dollar bearing now or risk windowing the case later...

    I might jump in a car with someone, it's unlikely I'll take the lotus, though. :(

    Sorry for the letdown, everyone.

    Leave a comment:


  • ColdAccord
    replied
    so are you going to blown euros or what bish. i'm leaving after I change my oil and get my tires mounted

    Leave a comment:


  • newman
    replied
    I love the way my car looks.

    Leave a comment:


  • Moto-Mucci
    replied
    Yea, but the ugly is a running theme, so it's cool.
    Plus there's gotta be that extra bit of satisfaction when you can walk a 600hp muscle car in a 20yo car with a Scooby Doo paint scheme.

    Leave a comment:


  • hotballs
    replied
    Wow, for such an insanely fast car with tons of work, it sure looks ugly.

    Leave a comment:


  • accident
    replied
    no.

    Leave a comment:


  • LowR3V'in
    replied
    ^did you get banned from there?

    Leave a comment:

Working...
X