If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Spark plugs installed
Valve cover gasket
Brake lines fitted with new fittings
Grommets and angular pipes for the brake
new guibo
intake manifold gaskets
Brake booster
brake res and lines
flywheel and clutch
transmission And Mount
Shifter and drive shaft
Starter
Trigger wheel
All Installed
Brakes and clutch bleed
Blower motor cover is sanded down and ready for paint.
It doesn't get any more "grassroots" then this. :) outside in the driveway , in the barn. Just like my place ! Good job.
That M20 had legs to run away from the car anyways!! look at those feet! muhaaa
slowly gettin some work done to the e30. but working in 5 degree weather suxs ass. steering knuckle installed and brake lines ran to the booster, front lines are t-fitted.
got my harness cleaned up now i gotta label the plugs where they go.
need to order a guibo, power steering crush washers, alpina tach strip, and cluster rings.
Gotta go to the parts store for more hose clamps and spark plugs. Then maybe get one of the local e30 guys to help me get this thing together.
Tore my gauge cluster apart tonite and started to paint the needles. Gotta wait for some money for the tach strip and some gauge cluster rings. Going to look tits!!!
Leave a comment: