If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Well after a briefly terrifying moment when I realized my $850 wilwood pedal investment was hitting the airbag column and would not work I gathered myself and got to thinking. The non airing columns mount down a lot further than the articulated stupidity of the airbag column. I bought one, tore it down and swapped everything over from my airbag column. For future reference this is a plug and play swap in any e30 equipped with an airbag.
This is the most awesome shifter I have ever used!
Still need the swap the non airbag steering column over to allow the master cylinder on the right to clear but everything else should go really smooth.
Finished mounting the oil cooler and remote oil filter housing setup that Garey (bmwmech1) made. Note the lower hose is not secured on the core support yet.
Leave a comment: