Nicks m50 swap and restoration project

[dnick]

swap to Motronic 1.3, screw those flywheel sensors. An engine harness and an ECU should be pretty much everything you need.

is that really all i would need? i mean. how much work are we talking about here?

[StereoInstaller1]

Man, if that same deal fell in my hands I would swap to Motronic 1.3, screw those flywheel sensors. An engine harness and an ECU should be pretty much everything you need.

[dnick]

interior is clean. keep us updated.

will do!

[Dermeister3]

interior is clean. keep us updated.

[dnick]

hey r3v, got a hold of an 86 325es on craigslist for dirt cheap.. yeah there are a few things wrong with it but nothing that aint fixable! The reason why he sold it so cheap is because of a no start. The flywheel pin broke off causing it not to run. It broke from the release bearing failing causing one of the tabs to break off and hit the pin on the flywheel. The sensors for the flywheel tested good.
On to the pics!!



have to find a spoiler!







SO next is dropping the tranny, putting a new flywheel and other crap in there, shift linkage shit, wires and plugs, yall know the normal stuff! haha