Announcement

Collapse
No announcement yet.

Project shark (635CSi content)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Project shark (635CSi content)

    So I sold my daily E30 to my parents. They were sick of the SAAB and wanted a clean 4 door BMW. So I turned over the paper work to them. So my Father knew I was looking for a daily to get my ass around till I finish my E30 build.

    He came up with a 1987 635CSi with 168k out of PA. The paint is a little rough and has some fender rust. This is NO MATTER to me at all. I own a complete 84 e24 to give all the parts needed to get this underway.

    I wanted some pictures to add but the listing was removed already.

    So here is the good:

    Owned by a BMW mechanic that owns his own garage.
    3.46 LSD
    Mint interior
    Strong and smooth motor and sport auto tranny
    Everything works mechanically

    Bad:

    Suspension is TOAST
    Needs the low beams fixed
    auto(tranny is perfect)
    Fenders need work and rear rocker needs to be cut out and welded new in
    paint is faded
    Drivers axel

    List of planned stuff:

    Bilstein sport shocks and struts
    Custom coilovers(I am building them)
    Mount my BBS RC 090 17x8
    5 Spd swap
    Euro bumpers
    OEM wing


    Engine/performance:

    Chip
    2.5 straight pipe to glass pack then to a free flow magnaflow

    Paint and body work:

    Sandblast rust sections and weld in new
    Replace front fenders and cut out the rears and weld in wider custom arches to get more room to stance.
    Matte battleship gray
    WWII era pinup girl airbrushed on the front 1/4 of the doors(friend of mine is NUTS at airbrushing)

    I know people are going to say I am copying Rusty or some shit... honest to god I am following in the steps of my family and my Uncle's rat rod. I grew up walking hot rod shows and have ALWAYS loved fighter style hot rods. I have been searching for a clean car to do this.

    FYI CAR BELOW IS NOT THE ONE I BOUGHT. Just wanted to show e30 owners what they look like ;)
    Last edited by F34R; 05-23-2011, 07:24 PM.
    ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

    Instagram: @BWeissLeather

    Current cars:
    ~ '87 325 M30B35 swap
    ~ '87 535
    ~ 01 540 Msport 6spd
    ~ '06 X5 4.8is

    #2
    This is going to be amazing, can't wait! :up:


    Go here be happy!

    Ratchet Garage e30 V8 build.

    Comment


      #3
      I can dig it


      Originally posted by stewie30luvr
      ooo cause i was fixing my chain tensioner and there was a black widow on the radiator so i killed it
      Originally posted by JakeP
      with a coathanger

      Comment


        #4
        Subscribed!

        BTW, I know the car you posted... glad its not the car you actually got lol
        My Seller/Buyer Feedback

        Performance Aftermarket Parts & Accessories

        Comment


          #5
          Originally posted by MrSlacker View Post
          Subscribed!

          BTW, I know the car you posted... glad its not the car you actually got lol
          Thanks Al, get on that guy for the missing link in the wheels ;)

          Glad I got a clean smooth running one!

          P.S. cannot wait till you start on your own build! excited to see you tear into that E36 =)
          ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

          Instagram: @BWeissLeather

          Current cars:
          ~ '87 325 M30B35 swap
          ~ '87 535
          ~ 01 540 Msport 6spd
          ~ '06 X5 4.8is

          Comment


            #6
            Sub'd for the 6ual nature of this thread
            Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.


            Originally posted by der affe
            first try a finger or 2, you need to have them suck on it first and get it nice and wet to help it slip in.

            if she goes for that, astroglide up your pole, have her lay on her stomach and slip it in slowly and bury it to your balls and leave it there until she relaxes. once she is used to it slam that ass like a screen door.

            Comment


              #7
              Originally posted by E30 F34R View Post
              Sandblast rust sections and weld in new
              Replace front fenders and cut out the rears and weld in wider custom arches to get more room to stance.
              Matte battleship gray
              WWII era pinup girl airbrushed on the front 1/4 of the doors(friend of mine is NUTS at airbrushing)

              I know people are going to say I am copying Rusty or some shit... honest to god I am following in the steps of my family and my Uncle's rat rod. I grew up walking hot rod shows and have ALWAYS loved fighter style hot rods. I have been searching for a clean car to do this.
              What?! copying rusty.
              rusty is an or was a e28, and its not the creator of rad rod nor to paint battle motives on it.

              THO i would shoot my neighbor if they did that to a clean e24, that car is way to clean to chop up. (by the looks of it, and the rear quarters are an "easy" fix")

              Comment


                #8
                Originally posted by Zic View Post
                What?! copying rusty.
                rusty is an or was a e28, and its not the creator of rad rod nor to paint battle motives on it.

                THO i would shoot my neighbor if they did that to a clean e24, that car is way to clean to chop up. (by the looks of it, and the rear quarters are an "easy" fix")
                I know what Rusty was, I loved that car. Mike and his friends did some amazing things to it. I just wanted to clear the air if people were to think I was trying to do something like that. If this car was clean I would not be doing this paint style. Would still be going low no matter what. I just did not know if the pinup girls would make people think I was doing my own spin off of Mike's dead car. My plans for this are a nice usable low cruiser.

                FYI I have not posted pictures because I cannot find the stupid cable to upload :hitler:

                Update for anyone that cares:

                Eating up all the info I can find on getting low...there is next to nothing for builds. So calling around for some Koni struts and rear shocks. For now I am using the ones off of my parts car(replaced 2 months before I bought it)

                Swapping the knock off Enkei wheels for the Ronal wheels on my parts e24.

                I will have pictures of before and after this weekend.
                ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

                Instagram: @BWeissLeather

                Current cars:
                ~ '87 325 M30B35 swap
                ~ '87 535
                ~ 01 540 Msport 6spd
                ~ '06 X5 4.8is

                Comment


                  #9
                  Update: Front suspension is completely done. I honestly was expecting it to be more annoying. I LOVE the bottom three bolts to remove the housing. Wish the E30 did that so it would bypass the control arm/bushings. So after a few hours of replacing and rebuilding the calipers. I am now sitting level and rocking out my Ronal 5 spoke staggered wheels. Threw the POS Enkei RS knock offs in the backyard xD

                  I took LOTS of pictures and I will have a cable tomorrow. So pictures sometime Sunday fellas!
                  ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

                  Instagram: @BWeissLeather

                  Current cars:
                  ~ '87 325 M30B35 swap
                  ~ '87 535
                  ~ 01 540 Msport 6spd
                  ~ '06 X5 4.8is

                  Comment


                    #10
                    It's Sunday! Pics!?!

                    Looking forward to your progress!
                    Originally posted by LJ851
                    kingston is the play by play announcer for this thread.
                    ‘Tis by the grace of God that my cars run!

                    Originally posted by unloadedak
                    #teamross
                    Siobhan's Build Thread - UPDATED!

                    Comment


                      #11
                      Originally posted by kingston View Post
                      It's Sunday! Pics!?!

                      Looking forward to your progress!
                      Got the cable today, sorry for the wait everyone.







                      Worst of the fender rust


                      Black parts car


                      Garage and lift were full at the time. So the driveway will suffice.


                      e24s making out ;) Ronal staggered 5 spokes and BBS RC 090 in the foreground. The Ronals are on it right now.


                      Me working like a BOSS, swapped the suspension from one to the other in 2 hours(Blk2gold/gold2blk). That fender and the passenger side are getting replaced by the black e24s perfect ones.
                      Last edited by F34R; 05-23-2011, 07:25 PM.
                      ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

                      Instagram: @BWeissLeather

                      Current cars:
                      ~ '87 325 M30B35 swap
                      ~ '87 535
                      ~ 01 540 Msport 6spd
                      ~ '06 X5 4.8is

                      Comment


                        #12
                        The black car appears to be in much better condition. Why not use that one?
                        -tim
                        Originally posted by Jordan
                        I like the stance
                        -Coining hip terms since 10/9/03

                        Comment


                          #13
                          Originally posted by Philo View Post
                          The black car appears to be in much better condition. Why not use that one?
                          Waited for that comment.

                          The black one is a nightmare, the underside is rusted from sitting in a field in PA. The undercoating was perfect but I guess it got damp on the carpet. Also there is rust that goes almost to the drivers door on the outer skin.

                          Anyways the gold one runs AMAZING has a 3.46 LSD and only needs a bit of welding and repaint. I have welded in worse with my father on our 76 MB build. Everything in the gold one works 100% and only needs a headlight and the SI board replaced. I am just swapping the mint one from the black one over.

                          Plus the black one was getting rained on at the time. So it looks pretty ;)
                          ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

                          Instagram: @BWeissLeather

                          Current cars:
                          ~ '87 325 M30B35 swap
                          ~ '87 535
                          ~ 01 540 Msport 6spd
                          ~ '06 X5 4.8is

                          Comment


                            #14
                            What size are the enkeis?
                            Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.


                            Originally posted by der affe
                            first try a finger or 2, you need to have them suck on it first and get it nice and wet to help it slip in.

                            if she goes for that, astroglide up your pole, have her lay on her stomach and slip it in slowly and bury it to your balls and leave it there until she relaxes. once she is used to it slam that ass like a screen door.

                            Comment


                              #15
                              Originally posted by DTM190 View Post
                              What size are the enkeis?
                              15" real splits
                              ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

                              Instagram: @BWeissLeather

                              Current cars:
                              ~ '87 325 M30B35 swap
                              ~ '87 535
                              ~ 01 540 Msport 6spd
                              ~ '06 X5 4.8is

                              Comment

                              Working...
                              X