316 superlite

[petrolhead]

.. I have always had a want to rebuilt a M10 turbo monster. lol

These cars will remain NA. Turbo'ed BMWs look great on 1/4 mile and such, but that's not my thing really. On a twisty backroad or racing circuit I'd always choose a car with NA engine & manual box.
I only lack the $$ to make that "old block" as big in displacement and rev as high as I'd like. 2300cc and over 8k rpm would not be rocket science.. But that's a story for later. The project-car is on hold til I get that black E30 painted.

that could very well be the coolest piece of euro schwag ive seen yet
i would love to have one of those

I wonder what it would cost to wrap one or 2 in bubble plastic and ship them to you. :/

[Massimo]

They replaced the Tacho with a clock with no second hand so you could time your 0-62mph in minutes.

True story.

Anyways the build is looks amazing so far, I have always had a want to rebuilt a M10 turbo monster. lol
keep up the great work.

[CreamBeam]

that could very well be the coolest piece of euro schwag ive seen yet
i would love to have one of those

[petrolhead]

Very nice!

I like the louvers, dogleg CR gear box, rear spoiler!

Tell me have you ever seen a clock instead of a tachometer in any bmw 316? I was told that is what this came from:

One with a clock is pretty much considered "standard" on a euro 316. And on many other models as well. I must have 2 or three of those on the shelf gathering dust.

[downforce22]

Very nice!

I like the louvers, dogleg CR gear box, rear spoiler!

Tell me have you ever seen a clock instead of a tachometer in any bmw 316? I was told that is what this came from:

[petrolhead]

Back to the black 316.. We started work on it, to get it ready for painting. I had several small dents and such straightened from it. A buddy of mine will do most of the preparations before painting. I'll take care of taking it apart as needed, and I'll do all the rust repairs myself. I'm just not handy at sanding primer paint and such.

I'll upload pictures HERE as we go along..

[petrolhead]

I bought one more E30, this time a 318iS. Not in very good shape. Now just standing there waiting for the right time/budget/inspiration..

[petrolhead]

Some de-rusting and testing for fitting....

Attempted fabrications, a failed prototype below :)


As for the number one black car.. I decided to take it off the road after we get home from the E30-meet in Muurame, Finland. I'll start working on it to get it ready for painting.

[petrolhead]

More poor quality pictures.. I got a pair of sidemirrors. Truly ugly but kinda light (= race ? :P )



Totally bolt on with a bit of drilling and cutting :)

[Myster-E]

Dam those cars are sick. Love the louvers!

[petrolhead]

Started work on the driver's side "engine carrier".



Old part looked bad on the outside, worse on the inside :O



Fully removed, I found moar rust inside & under it. No surprise there.



Trying to remove some of the brown stuff...


This needs a bit more wire brush, acid and sandblasting:



Wanted to see if an E28 sport seat and covering from E30 cabrio fit. Not much space to use the seat adjustments:

But what the hell, I only need to adjust it once :)

I found an even smaller and lighter brake booster, from a MkII Golf 1,3CL. In the pic mated to an E28 535i aluminium main cylinder. Saved another kg compared to MkI Golf booster. And ofcourse the original one is even heavier.

Fuel collector tank (or what do you call it, for scavenging anyway-) in the making. A buddy of mine TIG-welded it together. about 1,7 litres. Not pretty but doesn't leak. I'll just have to hide it well.


Re-routed the piping which holds fuel tank breather hoses, it now also supports the right rear shock tower. Bad pic quality I know :oops:

[petrolhead]

There's one positive thing about this rusty pile of s..t , kinda hard to explain though. I'm interested in making the chassis stiffer. Now , if I didn't have to pretty much cut it in to pieces and put it back together, I wouldn't know what I know now, where the chassis needs strengthening etc. (well , I think I know :) )


Once you cut something out and make a new part , you always make it stronger , and weld/glue it on so it sits on tighter than original.
Before anyone asks, a roll cage is something I just don't want in a street car.

Reason I'm trying to rebuild this shell and not switch to a newer one in better condition , is that this one is so old. Once I re register it and have it MoT'd , it has less strict emission limits than cars 1986 onwards. Plus side indicators aren't mandatory before 1985.

[Eecen]

You're brave taking on all that rust. Brave in a good way though, keep it up man :up:

[petrolhead]

2 316s? did you find them walking to the bakery with your dad one day? :)

jokes aside, wow. nice job man. looks like you're putting in a lot of work. keep it up.

Well I do have two other E30s , for spares. 1984 318i & 1985 318i..
My daily driver is none of these but an E46 touring. Waiting for summer to take that black one on the road..

[Kershaw]

2 316s? did you find them walking to the bakery with your dad one day? :)

jokes aside, wow. nice job man. looks like you're putting in a lot of work. keep it up.