Project Daily Driver Eta: Slow and Meticulous

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • kingston
    replied
    I'd say a big "YES" on the M3-style antenna. I'll do that to my car at some point as well. Props for continuing to bring this one back!!

    Leave a comment:


  • AcSchnitzer318is
    replied
    Originally posted by BUDNUNTA
    Are they going to put clear on it?
    If it turns out the original is single stage that is what they are going to lay down to avoid any reactions.

    Originally posted by xphiledan
    love the attention to detail
    Thanks. OCD has it's benefits and draw backs.

    Leave a comment:


  • xphiledan
    replied
    love the attention to detail

    Leave a comment:


  • BUDNUNTA
    replied
    Are they going to put clear on it?

    Leave a comment:


  • Schnitzer318is
    replied
    ^Yes she does have a bit of a noisy valve train to her. It will be fixed eventually. Looking for a good head... Would look for a replacement motor but this one has so many miles on it that I want to keep it original.

    Feb 23, 2012

    Dropped the car off at the body shop after tucking the rear bumper, swapping to a late model front valence, and removing much of the trim. I don't trust body shops to do trim removal under most circumstances. You always end up with missing fasteners and broken clips.

    They are repairing all the dents (that they find), doing some rust repair on the rear of the car, and giving her a complete respray of the original Alpine. They are going to respray the trunk area and delete the antenna hole too. I had thought about doing an m3 "rc" car style antenna but I am not sure. What do you guys think?









    March 2, 2012

    Went to get a look at the car and see what had been done. Not a whole lot... I told them to take their time. They did manage to get all the dings out of the driver side and the roof. They said they were going to hit it hard today and finish the dents and start on the rust repair next week.

    Here is how she was. I had pulled the glass for them earlier in the week.



    Leave a comment:


  • firefirefire90
    replied
    Originally posted by Schnitzer318is


    She goes in for paint next week! Stay tuned ladies and gentlemen.
    this entire video, I thought you were trying to start the car. Interesting sounding vehicle :rofl:

    Leave a comment:


  • Simon S
    replied
    Fuck yeah.

    Leave a comment:


  • TopOfTheLine89
    replied
    Great job. Love the gearing of the etas for daily and highway driving. 90 at 3 grand, can't beat it.

    Leave a comment:


  • Schnitzer318is
    replied
    ^Thanks... it's coming along for sure.

    Originally posted by coop
    any tips on getting that rear roundel off?
    Grab a couple of thicker cloths... like microfiber or something and the factory flathead screwdriver in the trunk. Push the microfiber cloth under the roundel with the tip of the screwdriver... then slowly pry. Be gentle but deliberate. The two pins are on the left and right side so you could also try going from one side to the other. Works every time.

    Originally posted by 2man
    its definitely looking a lot better! might i suggest an ebay chip. why an ebay chip? because they are cheap and its an eta! mine really woke up my car and for $40 it was worth the risk of it being junk (which it wasnt)
    I have run ebay chips before and they are all copies of legit chips. I might buy one in the future but for now I am enjoying being able to use regular fuel (87) and getting 30+ mpg.

    Originally posted by Habla
    $30 shipped for the ansa? Double your money!
    Ummmmm...

    February 09, 2012





    Added some flair for the quarter panel windows... unfortunately these are the v1 stickers so they will flake and peel after a couple of months. Oh well.





    Had my exhaust guy weld the Ansa muffler onto the car. Started it up after he was done and it was too quiet so I had him cut out the factory resonator as well. Now it is the perfect blend of sport and volume for a daily car.

    Below is a video... don't mind the horrendous drivetrain noise. I am going to rebuild the head this year sometime to alleviate that... assuming the problem isn't piston slap which will be eliminated as a possibility before doing the head of course.



    She goes in for paint next week! Stay tuned ladies and gentlemen.
    Last edited by Schnitzer318is; 02-09-2012, 02:29 PM.

    Leave a comment:


  • eur04lif3
    replied
    love the progresion, nice save

    Leave a comment:


  • Habla
    replied
    $30 shipped for the ansa? Double your money!

    Leave a comment:


  • 2mAn
    replied
    its definitely looking a lot better! might i suggest an ebay chip. why an ebay chip? because they are cheap and its an eta! mine really woke up my car and for $40 it was worth the risk of it being junk (which it wasnt)

    Leave a comment:


  • coop
    replied
    any tips on getting that rear roundel off?

    Leave a comment:


  • Schnitzer318is
    replied
    ^Buy one... they are less than $100 and I'll help you swap it in. ;)

    BTW... make a thread about your car damnit! Then PM me a link.

    Leave a comment:


  • Mouse
    replied
    Dammit Joe, now I want a crack free dash.

    Leave a comment:

Working...