85 Euro 320i Tranforms (Hartge H35) + H bomb

[Old city bimmer]

this awesome taken on. looks good.

[Roadwolf]

It's not the problem, it's only for me. My objective is just do it myself.

Look my creating, it's just for me :





I made this, because this blue part is fragile...




You've another MP for other details.

[e30m3s54turbo]

Also, do you can pass me the right dimensions for my drawing dead pedal ? if possible in centimeter, otherwise inch.

Are you going to reproduce the Hartge dead pedal?
How much? A average Hartge dead pedal go for $350-$450.

[Roadwolf]

Also, do you can pass me the right dimensions for my drawing dead pedal ? if possible in centimeter, otherwise inch.

[Roadwolf]

Thanks.

I will be emailing you about the head light adjuster later in the future.

Your parts look nice. I really like the Hartge tip and muffler!
Is you muffler made by Supersprint for Micheal P.W.? Just like Hartges back in the day.

Thank you. Yes, to MPW. this is a true gem! :D
But you know, normally my HARTGE rear tip exhaust system is only for H27 / H27X. When you look on your catalog, it's right ? I think maybe, traditionnaly, it's not for H23, H26, H28.

[e30m3s54turbo]

Hi Raul,

BMW sells this equipment for 180 € (command + 2 tubes white/blue + 2 pistons)
This system has an efficiency work for ten or fifteen years... it's an air system.

But 1 brush for light cost 40 €, therefore 160€ for 4 brushes without command electromechanical system and without "brush arm"...

Regards

Thanks.

I will be emailing you about the head light adjuster later in the future.

Your parts look nice. I really like the Hartge tip and muffler!
Is you muffler made by Supersprint for Micheal P.W.? Just like Hartges back in the day.

[Roadwolf]

Hi Raul,

BMW sells this equipment for 180 € (command + 2 tubes white/blue + 2 pistons)
This system has an efficiency work for ten or fifteen years... it's an air system.

But 1 brush for light cost 40 €, therefore 160€ for 4 brushes without command electromechanical system and without "brush arm"...

Regards

[e30m3s54turbo]

Hello Vinctis.

How much are the head light adjusters? I have 20 year old plus adjusters that probably will not work.

[Roadwolf]

Well ok, thanks for your MP, here is more pictures, thank you, it's a pleasure.
(Raul, you're cool !) :















For light's Brushes, with or without :


white or grey BMW torch :



And the top of top for 325iX :





http://www.realoem.com/bmw/showparts...50&hg=51&fg=75

Regards

[Roadwolf]

Finally get to see a real IX Hartge. wow. and a touring too! Definitely need more pictures roadwolf...

Raul great to see you posting again! Where did you find that amazing exhaust? It looks to be in great condition

Thank you very much bradnic. Give me just a moment for some details (rear Hartge exhaust to replace (too damaged) + BBS rear bumper + 3 gauges (thanks to Raul-BMP Design - perfect delivery in my home - Belgium - Europe) ) :D

Ebay.de is your best friend for all things hartge,alpina, and ac schnitzer. I there is another hartge or alpina exhuast system on ebay now

http://www.ebay.de/itm/Original-Genu...item1c417cbeff

Be careful with MPW...
And I'll use a new HARTGE rear exhaust system. A beautiful part, but it's a copy ! He produces copies !!! He sold me a copy (for €€€€) :
I paid this part at MichaelWB, in its office, in Aachen. But he's not honest. I forget.
comparative :
Original Hartge rear exhaust :


And the copy MichPW :

[Roadwolf]

Vinctis, Your ix looks so nice. I like the ix head light wipers kit. Very rare to find.
The only thing in the engine bay it needs is a Mason strut bar. Here is a link.
http://www.masonengineering.net/Subpages/E30.htm

Your air dam looks different from a Hartge plastic e30.

Here a pic of mine for a plastic bumper 88>up. These is for a future project.

DSC03477 by m3raul, on Flickr



Very nice dead pedal.

I have 3 Hartge dead pedals. Two of them are the same. The third one is just a little different on top where it mounts.

You're right, Raul, for the strut bar. Really.

Now, for my plastic bumper BBS, (mounted by me) It's just a logic :

First :
You know : Wheels Hartge (14 inch, 15, 16 and 17 inch) are produced by OZ Racing, not by HARTGE...
But OZ/HARTGE don't produced for iX.

For wheels 325iX, it's only produced by BMW and BBS. Therefore, What wheels for my iX : BBS (ET41-15inch) or BMW (ET47-14inch), but not wheels HARTGE...

Therefore : Which plastics bumpers with my BBS iX wheels ? ----> Solution : beautiful BBS bumper, logic ! :-)))
BMW iX wheels

BBS iX wheels


Second :
And it's most aerodynamic plastics bumpers than cons BMW, HARTGE and others.
Also, in the line between BMW plastic bumper above and BBS plastic bumper below, in the air penetration. See picture




And rear, BBS best finish, best design... really best :-))) It's just my opinion.



HARTGE : improper assembly :



BBS :




Third :
Also : If you take the bumper for the miror line, for the silver strip Hartge, you find too striped on BBS bumper, as a miror style. Again the front with the pinstriped above and below of BMW bumper.

After study of the lines, I've choose BBS :) :) :) :) :)

[e30m3s54turbo]

Finally get to see a real IX Hartge. wow. and a touring too! Definitely need more pictures roadwolf...

Hey Brad.

If you are still interested in a ix head light wiper kit. Like the one on the ix touring. You may want to pm Vinctis for a lead to find one.:D

[e30m3s54turbo]

Raul great to see you posting again! Where did you find that amazing exhaust? It looks to be in great condition[/quote]
I found it for sale on s14 forum. I have other e30 m3 Hartge muffler coming from the UK.

Ebay.de is your best friend for all things hartge,alpina, and ac schnitzer. I there is another hartge or alpina exhuast system on ebay now

http://www.ebay.de/itm/Original-Genu...item1c417cbeff

On ebay Germany you can find brand new one for $1,235 + shipping. Muffler only. The seller is Micheal P.W. He sells a lot of Hartge parts for $$$$.

[ThatOneEuroE30]

Finally get to see a real IX Hartge. wow. and a touring too! Definitely need more pictures roadwolf...

Raul great to see you posting again! Where did you find that amazing exhaust? It looks to be in great condition

Ebay.de is your best friend for all things hartge,alpina, and ac schnitzer. I there is another hartge or alpina exhuast system on ebay now

http://www.ebay.de/itm/Original-Genuine-HARTGE-H23-Auspuff-exhaust-E30-320i-323i-/121357778687?pt=DE_Autoteile&fits=Platform%3AE30&hash=item1c417cbeff

[bradnic]

Finally get to see a real IX Hartge. wow. and a touring too! Definitely need more pictures roadwolf...

Raul great to see you posting again! Where did you find that amazing exhaust? It looks to be in great condition