Adam's Glacier Sedan
Collapse
X
-
i've heard decent things about both BC and megan coilovers. apparently you can order custom spring rates. however, you'll need a welder to install: http://www.e30tech.com/forum/showthread.php?t=91779
if/while you have access to a welder, consider having trailing arm toe/camber adjusters welded in. use stock rubber RTABs, and talk to Carlos at Condor Speedshop for their delrin 12mm subframe riser bushings, as well as their delrin offset M3 CABs. don't forget heavier duty RSMs and reinforcing plates.
for a cheap sway upgrade, 21mm front (from e30 convertible) and 14.5mm rear (from M3 or iX) will do you right.
when you're looking for an e36 rack, don't get a 95 M3 one, the variable ratio is goofy. all others including z3 racks are good news. -
-
So with the lsd going in I'm thinking about a mild suspension build/refresh. Thinking all new bushings, bc racing or Megan coilovers. Also thinking sway bar upgrade but have no idea what to upgrade to.
And then brakes. Thinking brembo blanks and hawk pads. But definitely open to suggestions.
As well as an e36 steering rack.
Sent from my SPH-L710 using Tapatalk 2Leave a comment:
-
Traded a rc drift car I had lying around for a 3.91 lsd so I can dorifto for real.
And I'm still trying to source a new bumper. Someone sell me one!
Sent from my SPH-L710 using Tapatalk 2Leave a comment:
-
Sooo small update.
Let a friend drive, she decided to break my lip.

Stitched it up. And threw it back on. I also ordered another IS lip and its chillin in my room.

Did an oil change this morning, and threw on a grip royal horn delete plate.

Pulled my roof rack off.

I also put some E90 drop hats, and got my coils to go a little lower. I'll get some real pictures here pretty soon.
Also ordered a new brake light switch since I lost my brake lights.
When I get paid I'll be getting a new bumper, gonna be super rad.Leave a comment:
-
As soon as I take some pictures. I've got E90 drop hats in, and I got a horn delete plate coming in from grip royal.
I've thought about, but the black doesn't bother me since it matches the bumper. And the car is going to painted at some point so I'm not worried about it.Leave a comment:
-
Is there a rattle can color that is close to your color? I'd do that valance. I spray bombed mine and it's not an exact match to my color but close enough that no one notices. Cool project!Leave a comment:
-
-
Small update. Rolled my fenders and spun my coil overs all the way down yesterday.






Leave a comment:

Leave a comment: