Andrew's s52 Zinno

[dillon7]

mmm that car sounds so good, still running open headers?

[kalib0y]

great looking car. with a rear apron, the car will be perfect

[adonwilson]

I haven't updated this in a long while. The car runs now:

http://youtu.be/ihdOvk-bjpI

And moves:

http://youtu.be/hfwzCJ03Ko4

And it's loud as hell.

[adonwilson]

What rad hoses did you use? M20 spec radiator? Swap looks proper!

Thank you! Definitely not trying to cut any corners. As few as possible anyway

They are Samco e36 hoses and a Mishimoto e36 radiator. The hoses had to be trimmed but they fit really well. This is the rad here (sorry for the mobile link):

http://m.mishimoto.com/bmw-e36-aluminum-performance-radiator-92-99.html

I know a couple people who have the same one in late model e30s

[Roysneon]

What rad hoses did you use? M20 spec radiator? Swap looks proper!

[adonwilson]

Haha I've seen so much of that car I hardly notice it anymore. It's not mine and it's in pieces now (more so than in the picture you see). I promise I'll post a pic or two when he puts it back together

[Unearth078]

that datsun... need to see more!

[adonwilson]

I never got a picture after the trans was mounted and the engine was level. It looks like it belongs in there




Power steering res unsure where it belongs


Cesar mounted it here. Looks awesome


This excites me.

Think I can fit a clutch fan in there? Hmmm...

Test fitted radiator hoses. They had to be trimmed. They're clamped and lookin nice now


Cesar ditched the e36 s50 fuel filter and put new lines from the body to the fuel connectors under the intake mani. Will continue to use the e30 filter


Test fitted intake to make sure it fit okay and to see where there was space to mount the remote brake reservoir


Damn I love it. Intake mani is just resting on the head right now because there's still a couple things to button up down there


Left to do:
-Plumbing for the ICV. I'm picking some misc hoses today to see what will work. Go figure that neither of my 24v motors had full ICV set ups to pick from
-Hose from the back of the head to the heater core
-Connectors for remote brake res - Waiting on the part. Have the grommets/hose/res already
-Rubber mounts for upper radiator support - can't seem to find the right part.
-Connector and hose from brake booster to intake mani
-Hose from coolant exp tank to radiator
-Finish output flange and mount guibo

Seems like a lot left before we can try to fire it up, but there's really not. Just a few small things. I should have all the parts required to start this thing by tomorrow afternoon. Waiting on an order from Turner and another from FCP

The interior as it sits. A mess

After the motor is running I will likely be ditching the carpet that's in there for a molded carpet. I plan to do a center console delete and mount the window switches and cig lighter on the dash. I like not having the console in there. I'm a big dude and it feels like found space.

Here's how it sits now.. Higher than it was before with the H&R sports. The BCs are on the car, but still need to be height adjusted

[adonwilson]

A few weekends ago we got the motor in. Again.. if this looks like a copy/paste from tech it's because it is!

Open wide


Just about


an dennn


Oh sht


Mounted!


Here's the booster, brake reservoir, and TPS connector clearance. Keeping in mind that the trans is hanging because it's not mounted yet...


Space between e32 735 booster and intake mani. Again, it's before the trans was mounted


I forgot to snap a picture when the trans brace was on. The motor looks a bit more natural in there now instead of tilted towards the back... obviously

The lighting sucks but here's how she sits now


It'll be lower when it's all done. About an inch lower. It's hard to see with the lighting but it rides a little high.



After the weekend here's what's left:
-Mishimoto radiator - fitment for early model
-2002 remote brake reservoir to clear TPS connector
-Grind trans output flange more. Got new OEM bolts and they weren't the same as the guide bolts
-Reroute fuel lines in engine bay
-Install ICV
-Hook up power steering
-Lines to the heater core
-DME connection
-Button up some wiring
-All fluids

[adonwilson]

With her shirt off


Once more


New t-stat, t-stat housing, water pump, crank sensor, AC removed


e34 pan on. Cesar welded the pump nut so that's not going anywhere


You can see the pink top 21.5 lbers peeking out from under the fuel rail. Hideous red intake manifold removed. Ugly white painted oil filter housing cap swapped in favor of a wrinkle coat black one. Wanted to get the VC powder coated but not happening until after we get it breathing under the hood of the e30. And my pretty new Bosch alt didn't fit. Boo


I grabbed the wrong valve cover gasket so we're still waiting on that.. But in the meantime


Shwing!


e34 m5 clutch


ebay headers. Not tightened down. Still unsure if the motor can/will be placed with the headers on or off



The motor is almost all wired up. Everything else will get connected when it's in the car. The plan is to drop the motor the next time I'm up at the garage. The only thing the car needs before that happens is the brake booster and master. Oh.. and a little engine bay clean up

[42000]

Looks like things are coming along nicely! Can't wait to see this thing when its done! I'm sure it will turn out nicely, Cesar always does great work!

[adonwilson]

Nice hope to see you at Bimmerfest.

I'll definitely be there. I'm really hoping the car will be there too. All depends on how the next couple weekends go for progress

zinno + iS airdam + s50 = really awesome!

That valance is my favorite part about the car. Well.. until the s50 is in place

[evandael]

zinno + iS airdam + s50 = really awesome!

[jink0619]

Nice hope to see you at Bimmerfest.

[adonwilson]

zinno + S50 = awesome!

Thank you much! Gotta love zinnoberrot

great job!
Kepp up the awesome work!

Thank you!