Hello everyone. My friend had started a build thread of his e30, and that made me want to post whatever pictures i already had. I wasn't able to take pictures all of the things I did to the car, but i will post up whatever i have.
I had purchased the car in norcal with a few problems; primarily a transmission problem, as the car could basically only drive in 5th gear. My friends and I tried to drive the car home, but we broke down 30 miles north of Bakersfield. Eventually, the car came home after some help from a few friends.
Here is a link to my album.
http://imgur.com/a/QmBCD
These were pictures from the seller.
The car was sold to me with a transmission, but it was for a later model. My friend who is building his e30 currently has it.
This is when it finally reached my home.
From that point, we started to take things apart for the engine to be removed to change out the hoses, timing belt, transmission, etc.
Once all of that was done, I was able to finally drive it.
While all of that was happening, i was also changing the interior and fixing some of the exterior parts as well.
Added a rear seat with pass through and head rests
Added sport seat for driver. I might still need a passanger one.
Found a better conditioned trunk, which i drilled holes into to add spoiler.
The front valance was bent and messed up, so i picked up another one. I also added the lower plastic part of the valance.
This is how the car pretty much is as of today (6/7/2013)
I also have weaves I will add soon enough.
I had purchased the car in norcal with a few problems; primarily a transmission problem, as the car could basically only drive in 5th gear. My friends and I tried to drive the car home, but we broke down 30 miles north of Bakersfield. Eventually, the car came home after some help from a few friends.
Here is a link to my album.
http://imgur.com/a/QmBCD
These were pictures from the seller.
The car was sold to me with a transmission, but it was for a later model. My friend who is building his e30 currently has it.
This is when it finally reached my home.
From that point, we started to take things apart for the engine to be removed to change out the hoses, timing belt, transmission, etc.
Once all of that was done, I was able to finally drive it.
While all of that was happening, i was also changing the interior and fixing some of the exterior parts as well.
Added a rear seat with pass through and head rests
Added sport seat for driver. I might still need a passanger one.
Found a better conditioned trunk, which i drilled holes into to add spoiler.
The front valance was bent and messed up, so i picked up another one. I also added the lower plastic part of the valance.
This is how the car pretty much is as of today (6/7/2013)
I also have weaves I will add soon enough.
Comment