E30 S52 Build + Turbo Install

[DrLeadFoot]

List of things I need.

-Fuel pressure regulator adapter for a M50.

-PLX Devices power plug for the wideband.

-Bigger I.D. vacuum line for my wastegate and the fittings to go with it.

The vacuum line should raise the boost up but I don't want to do that until I get my wideband working (again). Then I can dial it in with the FPR.

I'm also going to have Kummrow fix my oil leak. Messed my arm up and wrenching probably shouldn't be happening.

Sent from my SCH-I535 using Tapatalk

Sent from my SCH-I535 using Tapatalk

[DrLeadFoot]

I installed this new HD radio that works with Samsung phones. Bluetooth is amazing!


These were junk so I popped some new ones in.


K&N filter installed.

The oil leak is fixed and it is running great!

[JCarp90]

This thread needs more videos.

[DrLeadFoot]

This thread needs more videos.

I'll see what I can do. I'm trying to keep a low profile with my reckless driving due to people looking me up for researching me and my career. I ONLY drive fifty five!

[DrLeadFoot]

A couple of pics of my old M3. RIP.

#B33RM3

[Murphy]

Great project, Looks stunning and power to back it up :)

Just about to start my turbo conversion on mine

[DrLeadFoot]

Thank you!

The e30 with a good amount of power is an amazing setup. I'm having so much fun driving it!

Sent from my SCH-I535 using Tapatalk

[Mesarina]

Subscribed, nice daily!!

[DrLeadFoot]

The culprit.


The new alternator.


The result.


Sent from my SCH-I535 using Tapatalk

[DrLeadFoot]

A little photo shoot.

[evoDRichie]

sick build! i wanna hear it

[kamotors]

looks great as usual

[DrLeadFoot]

sick build! i wanna hear it

It isn't that loud cruising around but when you get on it she awakens the dead!

looks great as usual

Thanks! When I drive cross country I'm going to hit you up!


Sent from my SCH-I535 using Tapatalk

[DrLeadFoot]

I'm 99% sure my oil pump nut loosened up while on a 3rd gear pull and the oil light came on. The motor didn't seize up. I shut it off really quick.


Just to see what the damage is.

I have all of the bolts off of the oil pan. It still is really tight on the transmission side even with loosening the two lower trans bolts. Do I need to pull the trans to get the pan off?? Help!!

The front of the pan is loose and while I was hitting it with a rubber mallet you can definitely hear something metal bouncing around in there. I think it is the oil pump sprocket by the sound of it.

Sent from my SCH-I535 using Tapatalk

[Changbangzilla]

great build makes me very envious!

Sent from my SM-P600 using Tapatalk