Black Mamba another 1jz vvti build :P

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • BlkE30v
    replied
    Im also working on a 5 lug conversion that will be beneficial to all who dont want to pay big money for m3/e36m3 5 lug..i will give updates on that soon

    [IMG][/IMG]

    Leave a comment:


  • kway
    replied
    Do work son! I'm diggin' it

    Leave a comment:


  • BlkE30v
    replied
    Took the oil pan off

    [IMG][/IMG]

    cut
    [IMG][/IMG]

    Test fitted

    [IMG][/IMG]

    Welded

    [IMG][/IMG]

    Painted

    [IMG][/IMG]

    Installed Good Clearance
    [IMG][/IMG]

    [IMG][/IMG]
    Last edited by BlkE30v; 01-28-2014, 04:53 PM.

    Leave a comment:


  • BlkE30v
    replied
    so i took out the pedal assembly and mated the booster delete plate to the assembly.


    [/URL][/IMG]


    After installing everthing the master cylinder was way too close to the intake manifold. i think im the only one that probably went with the stock master cylinder i just added a spacer to the intake side mount.... usually everyone orders the wilwood.

    [IMG][/IMG]

    [IMG][/IMG]



    i forget to take another pic of the space difference, but i got a good inch clearance now. More updates coming soon tomorrow i have to cut and weld oil pan

    Leave a comment:


  • BlkE30v
    replied
    Little update received my massive brake booster delete

    [/URL][/IMG]

    Leave a comment:


  • BlkE30v
    replied
    Originally posted by Q8y_drifter
    Hows the position of the shifter in the factory hole? I'm guessing you'll have to go with a different shifter mount to push it forward.
    Well I'm still moving around the motor more back and forth trying to make sure I have enough space for my radiator.

    Leave a comment:


  • Q8y_drifter
    replied
    Hows the position of the shifter in the factory hole? I'm guessing you'll have to go with a different shifter mount to push it forward.

    Leave a comment:


  • BlkE30v
    replied
    clutch slave cylinder arrived today, we are now mocking up the driveshaft so we can send it off to get fitted and balanced

    [/URL][/IMG]

    Leave a comment:


  • BlkE30v
    replied
    Picked up a 3 1/4 piping with a resonator [IMG]


    [/URL][/IMG]

    Leave a comment:


  • BlkE30v
    replied
    Bump

    Leave a comment:


  • BlkE30v
    replied
    question for any person running the mtec11 front bumper on there car, i have to adjust my intercooler because it is touching the body and with the stock bumper it leaves me with no space for adjustment...so my question is does the mtech bumper come out further than the stock bumper?..

    Leave a comment:


  • BlkE30v
    replied
    Originally posted by ecrossdaily
    what is the fitment like on that rad? Did you have to make custom brackets?
    fitment is good i removed the clips where the original radiator sat and now it rest on the frame, and yes i need to make brackets to hold the radiator from the top and it should be good.

    Leave a comment:


  • Ecrossdaily
    replied
    What is the fitment like on that rad? Did you have to make custom brackets?

    Leave a comment:


  • BlkE30v
    replied
    SO I WENT WITH A MINI COOPER S RADIATOR..WHY YOU MAY ASK? 1.ITS DESIGNED WITH BETTER FLOW 2. A FRIEND OF MINE IS RUNNING IT ON HIS S52 TURBO SWAP ON THE TRACK WITH NO OVERHEATING ISSUES 3. FREE'S UP SPACE IN THE ENGINE BAY FOR CONDENSER.

    [/URL][/IMG]

    IM ALSO USING A FORGED RACING FAN SHROUD FROM A AE86 COROLLA

    [/URL][/IMG]


    MY FANS ARE SUPPOSE TO ARRIVE TOMORROW THEN IM GOING TO MAKE A CUSTOM BRACKET TO SUSPEND THE FAN IN THE SHROUD

    [/URL][/IMG]

    Leave a comment:


  • BlkE30v
    replied
    Originally posted by Good & Tight
    I live in Davie by shotgun rd, you close by?
    I live off 595 and hiatus..your not too far..

    Leave a comment:

Working...