If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
finished product, going to eventually sand the calipers, paint and ad new brembro badging. also waiting on steel braided line in mail, then brakes will be done. if anyone is attempting to do this conversion 18" wheels is a must..these calipers are HUGE
got this in the mail today still waiting on the aem wideband...
[IMG][/IMG]
currently working on custom downpipe, read that the stock downpipe was restricting the motor and is the cause of blown turbos..so i went with a 3.5in downpipe
cut the traction control sensor off the throttle body befor/after
5 lug conversion is done :D:D:D im running cobalt ss rotors and calipers as my big brake set up i had a adapter bracket made up and i drilled the rotor holes from 5x114 to 5x120 here is a couple pics
I wonder if that radiator would work with a m30 swap and the clearance issues associated with that. Can you provide more info on the one you used? If it will work I just might pick one of those up.
Swap looks good, excited to see the end result.
it will work ill give you updates later im gonna be mounting it today..yeah man im excited so far to where its at..just want to drive this thing already
I wonder if that radiator would work with a m30 swap and the clearance issues associated with that. Can you provide more info on the one you used? If it will work I just might pick one of those up.
Leave a comment: