If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Im also working on a 5 lug conversion that will be beneficial to all who dont want to pay big money for m3/e36m3 5 lug..i will give updates on that soon
so i took out the pedal assembly and mated the booster delete plate to the assembly.
[/URL][/IMG]
After installing everthing the master cylinder was way too close to the intake manifold. i think im the only one that probably went with the stock master cylinder i just added a spacer to the intake side mount.... usually everyone orders the wilwood.
[IMG][/IMG]
[IMG][/IMG]
i forget to take another pic of the space difference, but i got a good inch clearance now. More updates coming soon tomorrow i have to cut and weld oil pan
question for any person running the mtec11 front bumper on there car, i have to adjust my intercooler because it is touching the body and with the stock bumper it leaves me with no space for adjustment...so my question is does the mtech bumper come out further than the stock bumper?..
what is the fitment like on that rad? Did you have to make custom brackets?
fitment is good i removed the clips where the original radiator sat and now it rest on the frame, and yes i need to make brackets to hold the radiator from the top and it should be good.
SO I WENT WITH A MINI COOPER S RADIATOR..WHY YOU MAY ASK? 1.ITS DESIGNED WITH BETTER FLOW 2. A FRIEND OF MINE IS RUNNING IT ON HIS S52 TURBO SWAP ON THE TRACK WITH NO OVERHEATING ISSUES 3. FREE'S UP SPACE IN THE ENGINE BAY FOR CONDENSER.
[/URL][/IMG]
IM ALSO USING A FORGED RACING FAN SHROUD FROM A AE86 COROLLA
[/URL][/IMG]
MY FANS ARE SUPPOSE TO ARRIVE TOMORROW THEN IM GOING TO MAKE A CUSTOM BRACKET TO SUSPEND THE FAN IN THE SHROUD
Leave a comment: