Announcement

Collapse
No announcement yet.

Don't know what build I am doing yet...Maybe a 2.7 turbo drift car?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • nrubenstein
    replied
    Probably be about the same cost and easier to drop in an s54. Just saying...

    Leave a comment:


  • 2mAn
    replied
    Is it because there is only 4?

    Leave a comment:


  • The Dark Side of Will
    replied
    Is the bore center wrong?

    Leave a comment:


  • dburgoon
    replied
    Well after a quick mock up these throttle bodies are just not going to work. Back to the drawing board for a good intake setup.

    Leave a comment:


  • 2mAn
    replied
    ahh nice. 38mm should be good, definitely not overkill. also, you wont be disappointed with the GC coils

    Leave a comment:


  • dburgoon
    replied
    Originally posted by 2mAn View Post
    I would do some research on sizing those ITBs properly. Most people go too big. I think 40-42mm were a good range for the M20. Id read digger's thread if you plan on building up the M20. Also I think there is different strut caps that will drop the front 15-20mm IIRC. either way keep it up
    Thanks, through my research people are using 38-42mm and these are 38mm so sizing shouldn't be too far off.
    And as far as suspension I'm thinking about going with ground control coilover kit

    Leave a comment:


  • 2mAn
    replied
    I would do some research on sizing those ITBs properly. Most people go too big. I think 40-42mm were a good range for the M20. Id read digger's thread if you plan on building up the M20. Also I think there is different strut caps that will drop the front 15-20mm IIRC. either way keep it up

    Leave a comment:


  • dburgoon
    replied


    Part 1 of the ITB's are here. Just need 2 more and I'll start making the adapters. Using the throttle bodies off of a gsxr.

    Leave a comment:


  • sam_
    replied
    looks great!! sub'd

    Leave a comment:


  • dburgoon
    replied


    Got the engine tore down most of the way today! Everything looks good with it

    Leave a comment:


  • dburgoon
    replied


    Engine out of the car! Time for a tear down. Stroker crank and itb's on there way!

    Leave a comment:


  • dburgoon
    replied
    Plans for the car has changed. Going to build an m20 3.0 stroker. Strip and cage the car and make a sweet track car. Once I sell my Subaru the build begins!

    Leave a comment:


  • dburgoon
    replied
    Rial wheels are for sale!

    Leave a comment:


  • dburgoon
    replied
    Today I changed out the exhaust for the shorty headers and full exhaust I got on the 325i because the manifold was cracked on the e. Once I got it all installed I have high idle problems. It idles at 1200 or so now. What could it be?

    Sent from my SAMSUNG-SM-N900A using Tapatalk

    Leave a comment:


  • dburgoon
    replied
    Has anyone messed with getting a re-upholstery kit for there car? My front sport seats are pretty messed up as well as the back seat

    Leave a comment:

Working...
X