SI Shift Lights - by E30 Innovative Goods

[E30 Innovative Goods]

Nice! Glad to see someone else working on things! Even it's it in competition. And even from the other side of the world, new to r3v!

All I ask is that you don't copy my work too, too much. :)

Rock on with your bad self. Provide a warranty, and you'll do well! Subscribed.

I honestly say...Good luck!

George,
We try not to think of you as a competition and we do our best not to copy your stuff.
But the idea of a mutisensor gauge in the hazard switch housing seemed a logical upgrade to your single sensor gauge.

We are sure you will do OK even with us as a competition. There is enough room for everybody.

[BMWManiac]

I don't have any additional sensors, just the stock ones. I was wondering if this would utilize the stock oil pressure/water temp readings, but getting the oil temp would require us to install an aftermarket oil temp sender

[E30 Innovative Goods]

I'm assuming we would need to install an oil temp sender, but could utilize the water temp and oil pressure senders that already exist?

There are different kind of temp and pressure sensors with different characteristics.
If you send us the characteristics of your sensors we can look into it and adjust the HW/SW so it will display the values according to the characteristics.

[george graves]

Nice! Glad to see someone else working on things! Even it's it in competition. And even from the other side of the world, new to r3v!

All I ask is that you don't copy my work too, too much. :)

Rock on with your bad self. Provide a warranty, and you'll do well! Subscribed.

I honestly say...Good luck!

[BMWManiac]

I'm assuming we would need to install an oil temp sender, but could utilize the water temp and oil pressure senders that already exist?

[E30 Innovative Goods]

Anymore details on the hazard switch digital multi gauge?

We are working extensively on the multisensor gauge.
We have a working prototype, that fits into the hazard switch plastic case.
Right now we are working on the red display cover lens, which we have to manufacture. The original lens does not fit our needs.

The gauge will be able to show you 5 measured values ( acu voltage and 4 sensors of temp or pressure by your choice).
You will be able to switch between the displayed values by pressing on the gauge (as you would on the hazard switch).

Here is a picture of an unasembled gauge:

[BMWManiac]

Anymore details on the hazard switch digital multi gauge?

[E30 Innovative Goods]

We changed the logo to something more pro-looking :)
Hope you like it.

[BraveUlysses]

1.) Jordih - qty 1
2.) kfrey_e30 qty 1
3.) SpyroE30 qty 1
4.) Sbullard878 qty 1
5.)e30 gangsta
6.)lovenissan
7.) Dublbass_monster (qty: 1)
8.)mavrikno13764 qty 1
9.) braveulysses
10.)
11.)
12.)
13.)
14.)
15.)
16.)
17.)
18.)
19.)
20.)

[mavrikno13764]

1.) Jordih - qty 1
2.) kfrey_e30 qty 1
3.) SpyroE30 qty 1
4.) Sbullard878 qty 1
5.)e30 gangsta
6.)lovenissan
7.) Dublbass_monster (qty: 1)
8.)mavrikno13764 qty 1
9.)
10.)
11.)
12.)
13.)
14.)
15.)
16.)
17.)
18.)
19.)
20.)

[Dublbass_monster]

1.) Jordih - qty 1
2.) kfrey_e30 qty 1
3.) SpyroE30 qty 1
4.) Sbullard878 qty 1
5.)e30 gangsta
6.)lovenissan
7.) Dublbass_monster (qty: 1)
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
16.)
17.)
18.)
19.)
20.)

[Lovenissan]

1.) Jordih - qty 1
2.) kfrey_e30 qty 1
3.) SpyroE30 qty 1
4.) Sbullard878 qty 1
5.)e30 gangsta
6.)lovenissan
7.)
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
16.)
17.)
18.)
19.)
20.)

[e30 gangsta]

Missed the first one I'm in. lol

1.) Jordih - qty 1
2.) kfrey_e30 qty 1
3.) SpyroE30 qty 1
4.) Sbullard878 qty 1
5.)e30 gangsta
6.)
7.)
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
16.)
17.)
18.)
19.)
20.)

[sbullard878]

1.) Jordih - qty 1
2.) kfrey_e30 qty 1
3.) SpyroE30 qty 1
4.) Sbullard878 qty 1
5.)
6.)
7.)
8.)
9.)
10.)
11.)
12.)
13.)
14.)
15.)
16.)
17.)
18.)
19.)
20.)

[E30 Innovative Goods]

Yes I would also like one of the shift lights if they are still being made. Will it work on a late 318is MotoMeter board?

Of course, it will work with your 318is MotoMeter.