Time attack BMW M20 New PB + More Power

[jules325i]

Ive Been meaning to do this for awhile so its a little late, but better late than never, My first car was an 1989 Bronzit 325i manual with LSD (Now Stroker) . Which started my love for e30's.





After doing a Few Track days in my 325i I wanted more...


SO...
Earlier this year I bought this White 1989 318i Manual E30.
In fantastic condition, it lived all its life in a dry area and is completely rust free, and thankfully has no sunroof.
My plan was to Build Dedicated track car so it began.


Like i said its a little late for a build thread however you will just see the final stages of the build.

My Goal is to get 350HP On E85 Fuel.

The Engine Is a 2.8 Stroker.
ETA Crankshaft
85mm 8.5:1 Ross Racing forged Pistons
IE Forged Rods
Vac Mild Turbo Camshaft,
Vac Retainers
IE Heavy Duty Rockers (All Hardware)
Vac HD Valve Springs
ARP Head Studs
Cometic MLS Head Gasket
IE Crank Scraper
Vac Oil Pan Baffle
TCD Log Manifold.
Kinugawa td06h-20g internal gated w/ BOV set at 14.5 PSI
KAMotors Intercooler + piping kit
Welded water jackets.


Cooling
Mishimoto Aluminium Radiator
16" SPAL Fan
Ordered Oil cooler kit..


Driveline
Getrag 260
Custom 6 puk cerametallic clutch
3.25 LSD
Solid Engine and Gearbox Mounts.


Suspension
so far...
H&R Race Springs
Bilstein Sport Shock absorbers
IE 25mm From sway bar
IE 19mm Rear sway Bar + reinforcement at mount.
IE HD rear shock mounts/reinforcement
KMAC Rear Camber + Toe Kit
KMAC Stage 3 Front Camber caster plates
New OEM wishbones
New OEM M3 Offset caster bushes


Brakes
So far...
Braided Lines
Ferodo DS2500 Pads allround
Whilst I work out what BBK to get

Steering
Plan to do a 2.7 Ratio Z3 rack swap, Sourcing parts for that swap now.


Fuel System + Engine Management + Ignition
so far...
80lb Siemens Deka Injectors
New OEM intank pump
2L AeroFlow Surge Tank.
AeroFlow 300l/hr High flow pump
E85 compatible fuel hose through the car.
Link G4Plus Extreme ECU (Yet fitted)
LS1 Individual coil packs.
BPR7ES Plugs
Custom Spark plug leads

Here is how it sits currently on 15x8 et20 Rota Grid Concaves 225/50/15

[IMG]
pic host[/IMG]


free picture hosting


[IMG][/IMG]

[IMG]
click image upload[/IMG]

[IMG][/IMG]

[IMG]
image hosting gif[/IMG]




[IMG][/IMG]




Stay posted for updates.

[AusScare]

Nice build! What sort of power are you hoping to make?

Will you be getting bigger brakes and wheels to handle them? Any closer pics of the wheel/tyre fitment (any scrubbing/rubbing?), I'm looking at something similar (hopefully to fit 4 pot calipers under if possible).

[jules325i]

Nice build! What sort of power are you hoping to make?

Will you be getting bigger brakes and wheels to handle them? Any closer pics of the wheel/tyre fitment (any scrubbing/rubbing?), I'm looking at something similar (hopefully to fit 4 pot calipers under if possible).

Hoping for 350HP+ On E85
Yeah looks like i'll be going a 17x9 with fender flares and run either 255/40/17 or 245/40/17 Yokohama Advan A050 all-round to handle the power, and get Huge brakes, to match.
Ill Get some better photos of the fitment tomorrow, no scrubbing or rubbing that I see however the guards have been rolled.

[ak-]

Excellent build list. More pictures!

[jules325i]

Excellent build list. More pictures!

I think I have missed heaps of parts aswell.
Yes ill get snapping and go through my phone, and upload more.

[AusScare]

Hoping for 350HP+ On E85
Yeah looks like i'll be going a 17x9 with fender flares and run either 255/40/17 or 245/40/17 Yokohama Advan A050 all-round to handle the power, and get Huge brakes, to match.
Ill Get some better photos of the fitment tomorrow, no scrubbing or rubbing that I see however the guards have been rolled.

Sounds intense.

Next time you have a wheel off, could you do me a massive favour and test fit the Massive 280mm template? I'm pretty keen to be able to fit big brakes under small wheels on my 318is.

http://www.massivebrakes.com/profiles/Profile_e30_Front_280x22.pdf

[jules325i]

Sounds intense.

Next time you have a wheel off, could you do me a massive favour and test fit the Massive 280mm template? I'm pretty keen to be able to fit big brakes under small wheels on my 318is.

http://www.massivebrakes.com/profile...ont_280x22.pdf

Yeah i'll give it ago and let you know.

[jules325i]

[IMG][/IMG]

dropped the car off to have the custom exhaust made, I will pick it up saturday and post pictures.

[jules325i]

Exhaust is done.

Pick the car up from HiTech mufflers -344 Bourke St, Darlinghurst NSW.
Amazing Job with my exhaust, Highly recommended. Ill take some photos of the dump pipe when I get it back from the ceramic coating shop.

[DaveLum]

Nice car mate

[sayed ali]

Nice build

[jules325i]

New Wheels

My new Wheels Arrived today, really happy with them.Koya 17x9 4x100 ET15 and light at 17lbs.
Will have tyres fitted by the end of next week (245/40/17) and will post pics.
Ill need a small spacer for up front to add clearance from the strut.
Great BBK Clearance too, Looking to run IE 310mm front and back.
Also waiting for some KAMOTORS Standard flares to arrive.

[CorvallisBMW]

Great looking engine!

[sayed ali]

is it running now? did you receive the specs of the cam from vac? do you mind to share the specs?

[jules325i]

is it running now? did you receive the specs of the cam from vac? do you mind to share the specs?

Not yet still waiting on a few little items. should be very very soon though.
Yeah I did Receive the specs, Ill try and find them today.
And post.