Face lift & Diet for this 30 year old gal

[Good & Tight]

what do you think you will be down to, weight wise, when you're done. I think these cars are right around 2400 when they are stock. I think you're easily under 2200!

Last weigh in was 2495, plus me = 2650. I'm hoping to be just under 2600 now.
M30 + C4 auto trans, 10 point cage is a lot of weight. There's more weight to loose, like windows & door bars, but I think this is good for now.

[2mAn]

what do you think you will be down to, weight wise, when you're done. I think these cars are right around 2400 when they are stock. I think you're easily under 2200!

[ThatOneEuroE30]

Once you reach 150mph in the 1/4 it's a requirement.



new exhaust is soooo light compared to the old steel one. If I were to guess it's 20lbs lighter.

Car is deff louder, not like a lambo that's for sure.!

I see shoots and wheelie bar in your future.

[Good & Tight]

You should put a shoot on the back just to fuck around haha

Once you reach 150mph in the 1/4 it's a requirement.

new exhaust is soooo light compared to the old steel one. If I were to guess it's 20lbs lighter.
Car is deff louder, not like a lambo that's for sure.!

[ThatOneEuroE30]

You should put a shoot on the back just to fuck around haha

[E30_Pare]

I predict v10 lambo noises

[Good & Tight]

More weight reduction.... 4" aluminum .065" thick tubing to replace the 4" steel.
It will start from the down pipe by the trans all the way out the back. Switching to aluminum is around 15-18 weight savings.
More interested in what it will sound like more than anything else.

[Good & Tight]

Gas pedal complete. Had some aluminum stock laying around and welded it on permanently.



Here's 1 min walk around vid at idle.

[Old city bimmer]

this thing is scary. My E30 got scared and went inside the garage....lol

[AdOz]

I can't wait to see videos when it's going!

[Good & Tight]

She's road worthy again. Switched the low beams to the high beam buckets.
Switched out the old cluster to a euro one, now the MPH works..
Few things left on the list:
1. Remove front sway bar
2. Fabricate gas pedal
3. Fabricate new 4" aluminum exhaust
4. Install trans temp gauge

Some random pics

[Good & Tight]

Do I see a clutch pedal lmao

Threw that in the pic for lolz..

Remove EVERYTHING unnecessary

Sawzalled that bitch right out..!!!!!

[ThatOneEuroE30]

Remove EVERYTHING unnecessary

That is true. Only in this one of kind beast

[ak-]

Do I see a clutch pedal lmao

Remove EVERYTHING unnecessary

[ThatOneEuroE30]

Do I see a clutch pedal lmao