Project Hartge H35 Tribute Vert...

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Mr. Burns
    replied
    The engine is from a 92 535.
    I used an e23 735 throttle body which supported the mechanical throttle cable and tps as opposed to the drive by wire and round tps.
    I used my m20b25 harness which IMO is easier than starting fresh with an m30 harness.
    To be honest I am running into some issues electronically...my starter is acting up and as a result my Hvac and windows no longer work...something to do with unloader relay circuit.

    Either way...I don't have anymore time to invest in wrenching on her as per new baby...so it'll be heading off to the pros to clean up my swap/wirring.

    Leave a comment:


  • 2002jm
    replied
    engine

    What year engine is this? Was it hard to wire up?
    thanks,
    jm
    looks great btw:)
    jm

    Leave a comment:


  • Bearmw
    replied
    I considered using that filter as well. I'm curious as to how it sounds? Coming along nicely.

    Leave a comment:


  • Mr. Burns
    replied
    Only pics really of the swap...gotta clean it up and switch up coolant expansion tank etcetera


    Leave a comment:


  • 2002jm
    replied
    :)

    More info. and pictures of the engine:). Car looks great.
    jm
    Go with hartge exhaust tip..

    Leave a comment:


  • Mr. Burns
    replied
    Originally posted by bradnic
    ^ this. Stunning car. You've gone so far with the exterior tuner bits here - incredible look. Also wondering about engine plans? Sorry if this was covered earlier
    Thank you:)
    Engine is allready m30b35 swap with Ssssquid tune and Ireland Engineering headers.

    Leave a comment:


  • Mr. Burns
    replied
    Originally posted by ThatOneEuroE30
    Needs more hartge muffler ;)
    Muffler is going to be addressed this sunmer...likely not hartge but something more suiting

    Leave a comment:


  • bradnic
    replied
    ^ this. Stunning car. You've gone so far with the exterior tuner bits here - incredible look. Also wondering about engine plans? Sorry if this was covered earlier

    Leave a comment:


  • ThatOneEuroE30
    replied
    Needs more hartge muffler ;)

    Leave a comment:


  • Mr. Burns
    replied
    Little update



    Leave a comment:


  • 411
    replied
    .............jspec progress
    Attached Files
    Last edited by 411; 05-13-2016, 05:03 AM.

    Leave a comment:


  • 411
    replied
    ............"glacier blue" on dark blue ready for transformation
    Attached Files

    Leave a comment:


  • bmwextremeguy
    replied
    All of you guys on this thread have done amazing excellent work, some of the best work I have seen, as not much happens in my area! I have done very little this month, besides send and sale some parts to Canada and Finland this pass few weeks. Wife has had up and down weeks due to changing of the weather. Wish I had the help of your network Mr.Burns, looks like you have wonderful allies like Mr. Barron and the others nearby to help. I pretty much have to most of my work, but sometimes get my few good local customers to help a little. Keep the posts and threads coming enjoy you and Mr. Barron posts!
    Shawn

    Leave a comment:


  • Mr. Burns
    replied
    Body shop did that.

    I'm good mechanically....don't ask me to make anything nice lol
    Last edited by Mr. Burns; 04-15-2016, 06:33 AM.

    Leave a comment:


  • 2002jm
    replied
    :)

    How did you get the side decals on?
    jm

    Leave a comment:

Working...